The barrier height and the series resistance of Ag/SnO2/Si/Au Schottky diode determined by Cheung and Lien methods
Journal Title: Journal of New technology and Materials - Year 2015, Vol 5, Issue 2
Abstract
Electronic parameters of Ag/SnO2 /Si/Au Schottky diode (SD) determined by Cheung and Lien methods are extracted using the current-voltage (I-V) and the capacitance-voltage (C-V) characteristics. Such SD is fabricated by the spray pyrolysis and the metallic contact is achieved by thermal evaporation process in vacuum. To determine more parameters of SD, the quantities like dV/dlnI, H(I) and Ga(V) are introduced. The non-ideal behavior of SD is confirmed, n=4.86 (n>1), the barrier height B and the series resistance Rs are found to be 0.62 V and 585 Ω (by dV/dlnI), 524.5Ω (by H(I). The use of C-V and C-²-V plots allow us to determine the density of acceptor (Na) and diffusion potential (Vd), at a kept frequency of 1MHz, of 7.8 1021 cm-3 and 0.49 V respectively. The profile of C-V, measured at various frequencies, reveals a p type of as fabricated SD where tin oxide layer is doped with 4% indium. Keywords:
Authors and Affiliations
Mostefa Benhaliliba
Keywords
Related Articles
- EP ID EP268353
- DOI -
- Views 72
- Downloads 0
Detection of electrical faults with infrared thermography
One of the problems that concern most often the electricians is how to determine the conditions or the state of operation of electrical systems quickly, without physical contact with the components and without disconnect...
Voice Recognition Technology Using Neural Networks
This paper presents the use of a Multi-Layer Perceptron Neural Nets (MLP-NN) for voice recognition dedicated to generating robot commands. Our main goal concerns the estimation of the minimal number of elements required...
Electronic structure and Fano’s antiresonance study of Cr3+ doped BIGaZYTZr fluoride glass
The absorption spectrum of Cr3+ in BIGaZYTZr (30BaF2-18InF3-12GaF3-20ZnF2-10YF3-6ThF4-4ZrF4) fluoride glass is characterized by the presence of features on the 4T2g(4F) absorption band. These features result from interac...
Effect of fin spacing on turbulent heat transfer in a channel with cascaded rectangular-triangular fins
Through this work, we performed a two-dimensional analysis of a constant property fluid (air) flowing into a rectangular cross section channel with staggered cascaded rectangular-triangular shaped fins (CRTFs). The gover...
Dependence of hardness to the applied load of the 42CrMo4 steel manufactured by MIM process
For the purposes of this article the hardness of material 42CrMo4 steel which is manufactured by metal injection molding (MIM) process was measured by Vickers method. When determining hardness the following loads: 196,1;...