The Calculation of the Contact Force and the Contact Width of Shaft Seals
Journal Title: Strojnicky casopis - Journal of Mechanical Engineering - Year 2019, Vol 69, Issue 1
Abstract
The aim of the article is to point out the sealing efficiency of the two-language seal of the water pump bearing when radially deflecting the shaft within radial clearance. In order to obtain a radial displacement of the shaft at a location under a two-language seal, dynamic bearing simulation was performed using the MSC Adams program. The largest radial deviation of the shaft was applied in final seal analysis where the contact pressure changes on the individual tongues of the seal were recorded.
Authors and Affiliations
Peter Šlesar and Roland Jančo
Keywords
Related Articles
- EP ID EP43981
- DOI https://doi.org/10.2478/scjme-2019-0010
- Views 216
- Downloads 0
nfluence of Induction Hardening on Wear Resistance in Case of Rolling Contact
The main aim of the presented paper is to show how heat treatment, in our case the induction hardening, will affect the wear rates as well as the ratcheting evolution process beneath the contact surface in the field of...
Seismic Resistance of Storage Tanks Containing Liquid in Accordance with Principles of Eurocode 8 Standard
Large capacity tanks storing various liquids are important components in distribution and transmission systems. During operation tanks can be subjected to different types of loading. Therefore, maximum attention must b...
Effect of Tapered Interference Fit between Impeller and Shaft in Turbo Machines
In Turbo machines, there are many components which are provided with interference to transmit torque and to maintain contact between them. There are transient scenarios where impeller and shaft lose interference and li...
Vehicle Speed Determination in Case of Road Accident by Software Method and Comparing of Results with the Mathematical Model
The paper addresses the problem to vehicle speed calculation at road accidents. To determine the speed are used the PC Crash software and Virtual Crash. With both methods are analysed concrete cases of road accidents....
Research of Cavitation at High Shear Stress
The article describes the theory of cavitation at high values of shear stress in a viscous liquid. For this purpose, a spatial model of two cylindrical shells imposed concentrically was designed. In the narrow gap betw...