THE FEATURES OF DEFORMATION OF SHELL-TYPE STRUCTURES UNDER CONDITIONS OF DYNAMIC LOADING
Journal Title: Збірник наукових праць Українського державного університету залізничного транспорту - Year 2018, Vol 178, Issue 12
Abstract
The article is devoted to the large-velocity shell designs, the main supporting element of which is thin-walled cold-deformed arched metal profile, which is manufactured directly on the construction site. The peculiarities of the technology of carrying out construction works during the installation of these structures are analyzed, and features and problems of the use of these structures in the territory of Ukraine, USA and the European Union countries are considered. The object of the research is a fragment of the specified special shell system. The purpose of the research is to construct a finite-element model of the research object, as well as refine, on the basis of this model, the existing methods of calculating the considered structures. Also, the goal of the study is to determine the frequency of own and forced fluctuations of the object of research, numerically and experimentally, and verification of the finite-element model, by conducting a full-scale experiment. The algorithm of finite-element modeling of the research object is considered, and the boundary conditions of the calculation scheme are considered. The analysis of the strained-deformed state of the shell-type structure from the dynamic effect of the wind is carried out, as the core in which these cold-deformed thin-walled profiles are used. The research was carried out on the basis of a compiled finite element model that implements the properties of a special-purpose shell. On the basis of the performed calculations, the analysis of the stress-strain state and the amplitude-frequency (frequency and shape of the proper oscillations) of the characteristics of the shell structure have been carried out. The calculation model was verified on the basis of a full-scale experiment, during which a load was applied to the considered full-size fragment of the shell-type system and measurements of amplitude-frequency characteristics were made by two-channel vibration analyzer "ONIKS". The enumerated in the aggregate predetermined the introduction of the system through the design of a number of erected objects.
Authors and Affiliations
Petro Reznik, Roman Koreniev
Keywords
Related Articles
- EP ID EP396466
- DOI 10.18664/1994-7852. 178.2018.138974
- Views 59
- Downloads 0
CALCULATION OF THE CRACK RESISTANCE OF REINFORCED CONCRETE ELEMENTS WITH ALLOWANCE FOR THE LEVELS OF NORMAL CRACKS FORMATION
The importance of the step formation of cracks in reinforced concrete elements for the modern theory of concrete and reinforced concrete is substantiated. The separate experimental investigations results and the major dr...
ANALYSIS OF THE CONDITION OF RAILS DURING OPERATION
The causes of the failure of rails, the defects that are emerge consequently and their location are considered in the article. The distribution of the decarburized layer along the perimeter and length of the rail is inve...
FEATURES OF CREATION FINITE-ELEMENT MODEL OF THE SYSTEM "BASIS – VIBROREINFORCED SOIL-CEMENT PILE"
The use of soil-cement piles produced by deep soil mixing technology as the bearing structures foundations of buildings of railway transport is efficient and less resource-intensive compared with other types of pile foun...
FINITE ELEMENT ANALYSIS OF THE STRESS AND STRAIN STATE OF THE NODE OF THE TOP BELT OF THE STEEL AND CONCRETE COMPOSITE CABLE SPACE FRAME
The article presents a design and numerical research of a node connection of spatial modules of the steel and concrete composite cable space frame in top chord. As a result of the research, an effective and simple constr...
PROBABILISTIC RELIABILITY ASSESSMENT OF GRAVITY ABUTMENTS ON ROCK AND NON-ROCK FOUNDATIONS BY THE CRITERIA OF STABILITY AGAINST DISPLACEMENT OF THE GRAVITY ABUTMENTS ON THE EXAMPLE OF HYDRO SCHEMES OF THE DNIEPER CASCADE
When calculating and designing modern hydraulic structures, it becomes necessary to assess their reliability and safety based on probabilistic methods. This work further develops the method for assessing reliability of g...