The Influence of Physical Fields on the Thermal or Dielectric Properties of Epoxy Composites
Journal Title: Фізика і хімія твердого тіла - Year 2016, Vol 17, Issue 4
Abstract
The latest developments in the field of materials to improve the physical and chemical properties is the use of physical modification of polymeric materials. The specimens of polyepoxy and composites on the base metal oxides CdO, PbO, Cr2O3 have been studied by methods of thermal and dielectric analysis. Blending physical fields during curing samples stimulates reduction of activation energy, but also contributes to the glass transition temperature and confirms the conclusion set conformational change in the interstitial fragments forming a grid Chemical oxirane polymers under the influence of external physical fields. Differences tanhesa dielectric loss determined topological structure changes due to the influence of external factors on the reaction polipryyednannya and forming a three-dimensional grid. Blending physical fields during curing samples stimulates reduction of activation energy, but also contributes to the glass transition temperature and confirms the conclusion set conformational change in the interstitial fragments forming a grid Chemical oxirane polymers under the influence of external physical fields. Differences tangents dielectric loss determined topological structure changes due to the influence of external factors on the reaction polyaddition and forming a three-dimensional grid.
Authors and Affiliations
Y. V. Bardadym, V. O. Vilensky
Keywords
Related Articles
- EP ID EP261705
- DOI 10.15330/pcss.17.4.533-538
- Views 82
- Downloads 0
Application of Gas Atomised MmNi4,3Al0,2Mn0,5 Alloy as Material of the Negative Electrode in Ni-MH Batteries
The electrochemical properties of the gas atomised MmNi4,3Al0,2Mn0,5 alloy electrodes such as activation rate, discharge capacity and high rate discharge ability have been investigated. Determined using electrochemical i...
Thermoelectric Properties of the Silver Doped Lead Telluride PbTe:Ag
Thermoelectric parameters of the PbTe:Ag using the variational principle were calculated. Analyzed the behavior of the conductivity, Seebeck coefficient and thermal conductivity from the impurity content. Established tha...
Features of the Structure of GeX2 (X = S, Se) Chalcogenide Glasses (Review)
This article reviews studies on the structure of chalcogenide glasses obtained from compound GeX2 (X = S, Se). Parameters defining the structure of glassy alloys are usually determined by Fourier transformation of experi...
Dispergation Kinetics under Annealing in Vacuum Chromium and Nickel Nanofilms which Were Deposited Onto Oxide Materials
Results of research of dispergation kinetics chromium and nickel nanofilms by thickness of 100 nm which were deposited onto surfaces of samples which have been made from alumina ceramics, quartz glass and sapphire, and h...
Automatization of Measurements of Photoelectric Parameters of High Impedance Semiconductor Films
A method for measuring the electrical conductivity and photoconductivity of semiconductor films with high electrical resistance is described. An electric circuit is presented and a computer program is developed. That pro...