The Influence of Pressure Distribution on the Maximum Values of Stress in FEM Analysis of Plain Bearings
Journal Title: Robotica & Management - Year 2016, Vol 21, Issue 2
Abstract
Several methods can be used in the FEM studies to apply the loads on a plain bearing. The paper presents a comparative analysis of maximum stress obtained for three loading scenarios: resultant force applied on the shaft – bearing assembly, variable pressure with sinusoidal distribution applied on the bearing surface, variable pressure with parabolic distribution applied on the bearing surface.
Authors and Affiliations
Vasile Cojocaru, Zoltan-Iosif Korka, Constantin Viorel Campian
Keywords
Related Articles
- EP ID EP269163
- DOI -
- Views 116
- Downloads 0
Determination of Position-Orientation Matrix for a Planar Parallel Topology Robot by Using the “Pair of Frames” Concept
The paper presents a method of determining the position-orientation matrix of the reference system attached to the characteristic point of a planar parallel topology robot, by using the “connexion” and “pair of frames” c...
Experimental Investigation on the Positioning Accuracy of the Translation Module of a 6-DOF Industrial Robot
The paper presents an experimental investigation regarding the positioning accuracy and kinematical parameters of the base translation module of a 6-DOF industrial robot. The positioning error of the translation module w...
The Constructive Approach to Human Capital Formation, a Factor in the Improvement of Educational Management
The article attempts to constitute a theoretical approach to the characteristics of university management and the peculiarities of a constructivist approach to training, conducting an analysis of the stage of knowledge f...
A Functional Model of a Serial Redundant Robot
The paper presents the mobility calculation, geometry and kinematics of a robot arm. It is a serial robot whose main spatial kinematic chain consists of four revolute joints. Four continuous current electric motors are u...
Aspects Regarding the Development of a Robotic System Used for Waste Management
In recent years the demand for productive waste sorting techniques has risen because of the need for a cleaner environment. The paper proposes a waste sorting robotic system that integrates parallel robots in a metallic...