THE INFLUENCE OF THE CONDITION OF THE SURFACE LAYER ON TRIBOLOGICAL PROPERTIES SPHEROIDAL FERRITIC CAST IRON AFTER PRESSING
Journal Title: Tribologia - Year 2010, Vol 229, Issue 1
Abstract
In this paper the results of the investigations of tribological properties of cast iron after grinding and pressing have been presented. The experiment was conducted by the help of the machine Amsler 135. As a lubricant the machine oil M10 was used. Studies have shown that by treating pressing the property of surface layer improves. This has implicated for improving the tribological properties: the reducing wear, the lowering of the coefficient of the friction, the temperature area of friction and the shortening the running.<br/><br/>
Authors and Affiliations
Stanisław Laber
Keywords
Related Articles
- EP ID EP517337
- DOI -
- Views 54
- Downloads 0
PROBLEMS OF THE SURFACE LAYER TECHNOLOGICAL FORMING IN THE ASPECT OF THE SCUFFING PERFORMANCE. PART II: THE TOPOLOGICAL APPROACH
The proposition of the topological approach to the technological creation of the surface layer’s scuffing performance is presented in this article. It was recognized, based on the cycle of experiments, that the scuffing...
THE INFLUENCE OF THE TYPE OF GREASE ON THE SYNERGY OF ITS COMPOSITION WITH PTFE POWDER AND COPPER POWDER
Studies of the influence of the type of grease on the synergistic effect of its compositions with PTFE powder and of copper during the lubrication of steel sliding pairs working in mixed friction area of were presented....
THE ANALYSIS OF THE INFLUENCE OF LASER HEAT TREATMENT OF THE CRANKSHAFT JOURNAL ON WEAR RESISTANCE OF THE BEARING
The aim of the presented research was to evaluate wear effects of bearing elements in case of modification based on laser alloying with boron of journal surface layer. The research was performed on ZPG-IV tribology teste...
NUMERICAL ANALYSIS OF THE INFLUENCE OF THE FRICTION COEFFICIENT ON STRESS DURING THE EXTRUSION PROCESS OF PERFORATED MATERIAL
Numerical analysis of stress, forces, and temperature during axisymmetrical cold extrusion of an aluminium alloy specimen was presented using Deform 3D. The rigid-plastic model was applied. The influence of a friction co...
INFLUENCE OF CLIMATIC AGEING ON EROSIVE WEAR KINETICS OF POLYMER NANOCOATINGS
The paper presents the results of erosive resistance investigation carried out on three-layer epoxy-polyurethane coating systems of different polyurethane top coat composition. Alumina nanoparticles with a grain size of...