The Investigation of the Wear Condition of Spur Gearbox under Variable Loads using Wear Debris Analysis Technique
Journal Title: International Journal of Automobile Engineering Research and Development (IJAuERD) - Year 2017, Vol 7, Issue 4
Abstract
The wear is a very common phenomenon during the meshing of the gears. The development and progression of the wear in gears may create catastrophic failures. In this study, the progression of wear condition in the gear has been predicted with on-line wear debris monitoring from lubricating oil together with visual inspections. The experimental set up has been designed and the experiments were conducted with spur gears under varying load condition. The effect of different load conditions on the progression of wear condition in the gear has been presented. The results demonstrate that the concentration and weight of particles in lubrication oil, and the measured area of wear exist on gear surface during wear progression correlate well with the severity of wear condition of gear acquired from the visual inspection.
Authors and Affiliations
A. S. Kushwah, R. B. Sharma
Keywords
Related Articles
- EP ID EP240258
- DOI -
- Views 88
- Downloads 0
The Investigation of the Wear Condition of Spur Gearbox under Variable Loads using Wear Debris Analysis Technique
The wear is a very common phenomenon during the meshing of the gears. The development and progression of the wear in gears may create catastrophic failures. In this study, the progression of wear condition in the gear ha...
HEAT RELEASE RATE, PERFORMANCE AND VIBRATION ANALYSIS OF DIESEL ENGINE OPERATING WITH BIODIESEL - TRIACETIN ADDITIVE BLEND FUELS
The diesel fuel experiments were conducted on diesel engine, with coconut oil methyl ester (COME)-Triacetin additive blends as alternative fuels. Reduction of CO2, CO, HC, NO, and smoke emissions were achieved successful...
MANUFACTURING ENGINEERING PROCESSES FOR OFF-ROAD BUGGY’S FUEL TANK PRODUCTION
In automotive industry pre-production design and developing a prototype is major substance to enhance the quality and productivity of the process. There is lot of software packages available to simulate the production pl...
Design and Performance Optimisation of the Steering System of a Vehicle
The steering system is the most vital element in any automobile. It helps the driver to keep control on the manoeuvring of the vehicle and it also provides stability to it. The major problems during design in Steering Sy...
The Simulation of Three-Dimensional Heat Transfer Through an Insulated Pipe by Variation of Solver Parameters
Conjugate heat transfer (CHT) involves three types, namely conduction, convection and radiation. Where conduction is the fastest mode of heat transfer. This formulation of heat transfer is governed by...