The Processing Techniques and Behaviour of Aluminum Metal Matrix with Different Reinforcement Materials
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
Improvement in the mechanical properties and retainment of properties is an essential requirement for the industrial application. The properties of the composite not only depend on reinforcement materials but it also depends on the manufacturing technique adopted for processing of the composites. This paper discusses various fabrication techniques of composite. This paper summarizes the various aluminium grades used in the industry and how its properties can be improved using different reinforcement materials like carbides, oxides, organic compounds and industrial agro waste. It reviews the influence of different reinforcement material on mechanical properties like hardness, tensile strength, density, and percentage elongation. This also paper reviews comprehensive data related to the research work carried with different various weight percentage reinforcement material.
Authors and Affiliations
Harish Mugutkar, N. Tamiloli, Vishaldatt V. Kohir
Keywords
Related Articles
- EP ID EP655919
- DOI 10.24247/ijmperdaug201980
- Views 91
- Downloads 0
Influence of Thermal Barrier Coating and Mems Biodiesel on the Performance And Emission Characteristics of Single Cylinder Diesel Engine
The aim of the investigation is to determine the CI engine performance and emission characteristics of methyl ester mango seed biodiesel fueled and zirconia thermal barrier coated single cylinder four stroke diesel engin...
Design and Simulation of Connecting Rods with Several Test Casesusing Al Alloys and High Tensile Steel
The connecting rods designed recently are made from cast iron and carbon steel, which possess less tensile strength, toughness and durability. To improve such concern, this work aims in designing and analyzing the connec...
An Optimization of Mechanical Properties of Friction Stir Welded Dissimilar Materials with Different Preheating Conditions
The aim of this work is to optimization of the mechanical properties of friction stir welded dissimilar materials with different preheating temperature. A series of joints were made on 04 mm thick Aluminum7xxx and Mild-...
Design Optimization of Rotor Propulsive Delta Wing
The Wing Rotor Configuration is designed for the purpose of VTOL (vertical takeoff and landing) which is a combination of Delta wing and rotor together integrated at the empennage section of the aircraft wing. The model...
Experimental Determination of Buckling Strength of Stiffened Panels
In engineering application, the use of stiffened plates made of composite structures has ve increased over the last few decades due to its high efficiency in terms of high stiffness to low weight and high strength. Gener...