THE RESEARCH OF THE OPERATION MODES OF THE DIESEL LOCOMOTIVE CHME3 ON THE IMITATION MODEL
Journal Title: Електротехніка і Електромеханіка - Year 2018, Vol 0, Issue 2
Abstract
Introduction. Fuel consumption by diesel locomotive during operation depends significantly on many factors, among which the main is the mode of driving a train. Purpose. Research on the mathematical model of the modes of driving a train on the site of Kharkiv-Merefa with the purpose of the main oscillograms of the operation of the locomotive on the site. Methodology. A mathematical model of the operation of the main units of the locomotive CHME3 in the Matlab environment was developed. The model of the diesel engine is based on the calculated indicator diagram of its operation, which is approximated by a continuous dependence. The control panel operates on a system of conditions, the purpose of which is to maintain the set speed. Results. In the course of the simulation, statistical data were obtained on the fuel consumption of the diesel locomotive when it operated on a section with a train of constant mass. Based on the data obtained, a three-dimensional surface is constructed showing the dependence of the fuel consumption on the time of the site's exploration and the maximum speed on the site. Practical value. The dependence obtained can be used to optimize the driving behavior of trains along a section. The apparent dependence of fuel consumption on the driver's behavior is the basis for the further development of automatic locomotive speed control systems.
Authors and Affiliations
S. G. Buriakovskyi, A. S. Maslii, V. V. Panchenko, D. P. Pomazan, I. V. Denis
Keywords
Related Articles
- EP ID EP486239
- DOI 10.20998/2074-272X.2018.2.10
- Views 81
- Downloads 0
MASS AND COST FIGURES FOR SPATIAL AXIAL THREE-PHASE ELECTROMAGNETIC SYSTEMS WITH CIRCULAR AND HEXAGONAL FORMING CONTOURS OF TWISTED MAGNETIC CORE RODS
For a spatial three-phase axial electromagnetic system with double-contour phase elements of the twisted butt-end magnetic core, analytical dependences for optimal geometrical relations determination over minimum active...
PROFESSOR P.P. KOPNIAIEV – SCIENTIST, PUBLIC PERSON, ESTABLISHER OF HIGHER ELECTRICAL ENGINEERING EDUCATION (to the 150th anniversary of his birth)
Purpose. To carry out complete historical and scientific analysis of Professor P.P. Kopniaiev's activities and establish his role and place of achievements in the formation of the basic concepts and directions of the the...
STABILIZATION OF PARAMETERS OF ASYNCHRONOUS ELECTRIC DRIVE WITH VECTOR CONTROL
A problem of stabilization of parameters of the asynchronous electric drive vector control system is considered. Usually such systems have two control channels. The synthesis of stabilizing controllers is made for every...
A METHOD OF AUTOMATIC DETERMINATION OF THE NUMBER OF THE ELECTRICAL MOTORS SIMULTANEOUSLY WORKING IN GROUP
Purpose. Propose a method of automatic determination of the number of operating high voltage electric motors in the group of the same type based on the determination and analysis of the account data of power consumption,...
A MATHEMATICAL MODEL OF THERMAL POWER PLANTS SMOKE EXHAUSTERS INDUCTION MOTORS SYSTEM OPERATION MODES
Purpose. Development of a model-software complex (MSC) for computer analysis of modes of the system of induction motors (IM) of smoke exhausters of thermal power plant (TPP), the basic elements of which are mathematical...