THE STUDY OF MOLTEN ZINC INTERACTION ON THE SURFACE OF REFRACTORIES IN THE PRODUCTION OF ZINC OXIDE
Journal Title: Materials Engineering - Materialove inzinierstvo (MEMI) - Year 2013, Vol 20, Issue 2
Abstract
This paper is closely connected with the complete process of indirect production of ZnO as well as with the problems which occur during the metallurgical process. Purity of raw materials has an important influence on the final quality of ZnO and the occurrence of slag that remains stuck on the walls of furnace linings. ZnO is generally produced in the melting furnaces with different types of ceramic linings. Input materials have to be analyzed and investigated in the order to the predict behavior from the aspect of the complex production process. Moreover, analysis of occurrence of undesirable phases in the batch, the output materials, character of furnace linings and waste material have to be evaluated and observed. Mutual interaction of all components will have a significant impact on the final quality of the ZnO. The result of the investigation of interaction occurring in the components will be used for the proposal of the suitable surface for furnace lining while the mentioned result is mainly obtained on the principle of chemical reactions and bonds. This surface for lining should have a minimum adhesion of the zinc and its alloys relating to production of ZnO.
Authors and Affiliations
Natália Luptáková, Evgeniy Anisimov, Irena Janotová, Peter Švec, Františka Pešlová
Keywords
Related Articles
- EP ID EP130605
- DOI -
- Views 83
- Downloads 0
QUALITY OF WELD CLADS APPLIED BY SAW METHOD IN ADHESIVE WEAR CONDITIONS
This contribution deals with the analysis of the renovation layer quality of continuous casting steel rolls, developed through the submerged arc surfacing method (SAW). The continuous casting roll was analysed via the de...
CORROSION OF COPPER PIPES JOINTS IN SIMULATED OPERATING CONDITIONS
Joining of copper pipes used for liquid media transport are made as demountable and fixation joints. This work deals with corrosion behavior of the joints made by soft soldering, hard soldering and fitting. Corrosion pro...
Degradation of Czechoslovak creep resistant steels after 50 years of service
Thermally loaded assemblies in the energy and chemical industries require materials that provide the necessary functional characteristics, even after very long periods of operation. For the assessment of these materials...
Modeling the damage of welded steel, using the GTN model
The aim of our work is the modeling of the damage in the weld metal according to the finite element method and the concepts of fracture mechanics based on local approaches using the code ABAQUS calculates. The use of the...
STRUCTURAL STABILITY OF HIGH NITROGEN AUSTENITIC STAINLESS STEEL
This paper deals with the structural stability of an austenitic stainless steel with high nitrogen content. The investigated steel was heat treated at 800°C using different annealing times. Investigation was carried out...