THE TRIBOLOGICAL RESEARCH OF MATERIALS FOR USE IN A MEDICAL TECHNIQUE
Journal Title: Tribologia - Year 2015, Vol 262, Issue 4
Abstract
The paper presents the procedure for technological research of new materials to be applied in a medical technique, especially for hip joint implants. The subject of the research and analysis was the metal-polymer combination in the plate-on-pin and ball-and-socket friction pairs. The surfaces of the tested components were shaped and prepared in accordance with the relevant guidelines of the standards. Tribological tests (modelling and simulating) were carried out using Ringer’s fluid. Tribological characteristics were determined. The correlation between technology factors (geometric features) constituted in the manufacturing process and tribological characteristics (friction coefficient, friction torque) as well as the surface shaped during operation (wear products) were established.
Authors and Affiliations
Magdalena NIEMCZEWSKA-WÓJCIK, Anita MAŃKOWSKA-SNOPCZYŃSKA, Witold PIEKOSZEWSKI
Keywords
Related Articles
- EP ID EP257261
- DOI -
- Views 34
- Downloads 0
THE INFLUENCE OF SELECTIVE LASER SINTERING PARAMETERS ON TRIBOLOGICAL PROPERTIES OF PA 3200 GF POLYAMIDE
The paper presents the preliminary results of tribological research on the material used in the selective laser sintering technology, SLS. The samples in the shape of rings were manufactured of PA 3200 GF polyamide powde...
WPŁYW KONSTRUKCJI MECHANIZMU RÓWNOWODOWEGO NA ROZKŁAD OBCIĄŻEŃ W PRZEKŁADNI CYKLOIDALNEJ
W obiegowej przekładni cykloidalnej moment napędowy jest przekazywany na koła obiegowe za pośrednictwem wałka mimośrodowego z osadzonymi na nim łożyskami centralnymi. Do wyprowadzenia momentu obrotowego z kół obiegowych...
THE INFLUENCE OF THE TYPE OF GREASE ON THE SYNERGY OF ITS COMPOSITION WITH PTFE POWDER AND COPPER POWDER
Studies of the influence of the type of grease on the synergistic effect of its compositions with PTFE powder and of copper during the lubrication of steel sliding pairs working in mixed friction area of were presented....
AN ESTIMATION OF SELECTED MATERIAL PROPERTIES OF THE HYDRODYNAMIC THRUST BEARING POLYMER LINING
Polymer materials are used more and more frequently for linings in hydrodynamic thrust bearings. The reason for that is that they exhibit many advantages in comparison with traditional bearings with babbitted pads. Relev...
THE INFLUENCE OF RADIATION MODIFICATION ON TRIBOLOGICAL PROPERTIES OF T5W, T7W PLASTICS USED IN KINEMATICS SYSTEMS