The Use of Ultrasound in the Treatment Process of Wastewater. A review
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2015, Vol 38, Issue 2
Abstract
In this paper, different types of ultrasound devices for the treatment process of wastewater are presented. The use of ultrasound in treatment processes is a method of perspective, an alternative to conventional methods. This technique is based on the cavitation phenomenon that occurs in liquids at ultrasonic irradiation and it is used to enhance or ensure the processes of heat and mass transfer. Some of the main advantages of using ultrasound, namely low consumption of additional material or energy, are presented in this paper. The categories of the ultrasonic transmitters distinguished on the basis of the principle underlying the generation of acoustic waves are described.
Authors and Affiliations
Nicoleta MATEI (CIOBOTARU), Dan SCARPETE
Keywords
Related Articles
- EP ID EP581388
- DOI -
- Views 87
- Downloads 0
On the Kinetics of Sol Gel Al:ZnO Thin Films Crystallization on Silicon Substrate
Recently, there is a growing interest in applying ZnO thin films on silicon buffer substrates for p-n junction devices, optical wave guide, etc. A sol gel process is very attractive technique for obtaining oxide thin fil...
A Two-Step Inverse Analysis Approach Used to Identify the Mechanical Properties of Metallic Materials Subjected to Large Plastic Strains. Applications to Local Investigations of Surface Layer’s Behaviour
The aim of this research work is to improve the experimental and numerical analysis of the local mechanical properties corresponding to metallic alloys used by bulk forming processes. A non-onventional upsetting test and...
Structure of the Eutectoid Zn-Al Alloy Obtained by Directed Solidification
This work analyses the structure of the eutectoid Zn-Al based alloy directionally solidified, with cooling rates ranging between 8.5-0.4 oC/sec. During cooling, the temperature gradient in the liquidus zone, respectively...
Investigating Tribological Processes in Polymeric Composites
The paper presents some results on investigation of the superficial layers of several polymeric composites intended for tribological applications. The evaluation of the tribological behavior is done with the help of SEM...
Study Regarding Gravimetrical Corrosion of the Superficial Layers Obtained through Electrical Discharge
The experimental research was made on superficial layers laid-down through electrical sparking on the steel carbon OLC 45 probes, the used electrode being made from a corrosion resistant material (Copper). The probes was...