Theoretical Considerations Concerning the Determination of Value for the Critical Speed of the Ball Screws from Numerical Axes Structure
Journal Title: RECENT - Year 2009, Vol 10, Issue 27
Abstract
A servo performance limit of the numerical axes from the numerically controlled machine tool structure is the first natural frequency of their mechanical structure, because this limits the maximum amplification on the system control loops. For this reason, it is very important the appraisal for the critical speed of the ball screws from the numerical axes structure made by a more exactly calculation procedure. Generally, the ball screw manufacturers offer in the instruction manuals, charts for the ball screw critical speed appraisal dependent on dimensions and type of their pillows. This method for the appraisal of the critical speed value is not a very accurate one, so that, while the feed velocities achieved by the numerical axes of the numerically controlled machine tools are increased, a more exactly calculation method is necessary for the optimization of the amplification parameters for the control loops. This paper aims to elaborate a calculation method for the critical speed of the ball screws from the numerical axes structure, as critical bending speed, which corresponds to one of the natural resonant frequencies, the first natural resonant frequency of the assembly consisted of the ball screw and its pillows being considered as significant frequency in this case.
Authors and Affiliations
Dumitru DUMITRU, Eugen STRĂJESCU
Keywords
Related Articles
- EP ID EP139540
- DOI -
- Views 134
- Downloads 0
Study by Simulation and Experimental Thermal Analysis on Solidification of a Part Cast of Al-Si-12 Alloy
Software for solidification simulation of parts with rotational symmetry, using cylindrical coordinates was developed. This allows simulation of solidification in the volume of parts with rotational symmetry through 2D s...
Contributions to the Recycling of Asbestos Cement and Plastic Waste
Identifying alternatives to landfill must be a priority of the waste management systems in European countries in the context of the new directive on waste, where recycling represents the core operation. With regard to as...
The Computational Modelling of Tire
The article deals with the computational modelling of the strain-stress analyses of radial tire for passenger vehicles. The Finite Element Method (FEM) using the program system ANSYS is applied to the computational model...
Control of a Discrete Planar Tentacle Robot
The paper deals with a special class of robotic arm, the tentacle robot. First, the discrete dynamic model of the tentacle arm is analyzed. The dynamic model of the hyper-redundant arm with continuum elements in conjunct...
Energy Efficiency in Refuse Derived Fuel Utilization
Refuse derived fuel (RDF) derived from municipal solid waste (MSW) is an issue of essential consideration for the sustainable management of the waste-to-energy concept. The policy of waste management in Bulgaria is based...