Theoretical Study of the Effects of the General Division of a Ring Spinning Triangle on Fibre Tension
Journal Title: Fibres and Textiles in Eastern Europe - Year 2016, Vol 24, Issue 2
Abstract
The geometry of a spinning triangle influences the distribution of fibre tension in it and affects the qualities of spun yarns. Spinning triangle division is one of the most effective measures and fruitful results have been achieved, such as Solospun technology. Therefore a theoretical study of the effects of general ring spinning triangle division on fibre tension is presented in this paper. The general case that the spinning triangle is divided into m parts including m - 1 parts of the primary triangle and one final triangle is investigated and two series of parameters: division proportions b i and triangle number at each part ni are introduced for i = 1, 2, ..., m - 1. Firstly a theoretical model of the fibre tension distributions at the front roller nip is given by using the principle of minimum potential energy. Secondly numerical simulations of fibre tension distributions in the spinning triangle with different division proportions b 1, b 2 and different numbers of primary triangles n1, n2 where m = 3 are presented. It is shown that the demarcation of fibre tension between any two adjacent primary triangles in the first part is decreased with an increasein b 1 or b 2 for the fixed n1 and n2. Meanwhile, for the fixed b 1 and b 2, the total magnitude of fibre tension is increased greatly with an decrease in n1, whereas it rises slightly with an increase in n2. Finally the effects of spinning triangle division on yarn qualities are analysed according to the numerical simulations and previous results.
Authors and Affiliations
Xuzhong Su, Xuzhong Su, Weidong Gao, Weidong Gao, Xinjin Liu, Xinjin Liu, Chunping Xie, Chunping Xie, Bojun Xu
Keywords
Related Articles
- EP ID EP106663
- DOI 10.5604/12303666.1191425
- Views 81
- Downloads 0
Relation between Extension and Bursting Strength Properties of the Denim Viewed Knitted Fabrics Produced by Cellulosic Fibers
Denim viewed knitted fabrics are softer, cheaper, and more elastic than woven denim fabrics. Clothes which are produced by these fabrics adapt the body movement easily because of their flexible structure. Since these fab...
Qualitative Evaluation of the Possible Application of Collagen Fibres: Composite Materials with Mineral Fillers as Insoles for Healthy Footwear
The research presented in this paper focuses on determination of the physical and mechanical properties of composites made on the basis of natural polymer, i.e., crushed collagen fibres which are waste from the leather i...
Segmentacja obrazu przędzy oparta na algorytmie FCM i analizie gradientu intensywności
Artykuł dotyczy oceny przeprowadzonej w czasie rzeczywistym segmentacji obrazów w oparciu o rozmyty algorytm C-średnich i analizę intensywności gradientu. Zaproponowano metodę segmentacji obrazów przędzy mającą na celu z...
Investigation of Thermal Properties of Ceramic-containing Knitted Textile Materials
The study presents an investigation of thermoregulatory processes of ceramic-containing textile materials used in cold environments. Bio-ceramic additives have a heat-retaining function caused by its far-infrared (FIR) r...
Thermal Stability of Polyester Fabric with Polyacrylic Coatings
The aim of the study was to assess the thermal properties of polyester (PET) woven fabrics with unmodified (PET/AC) and flame-retardant modified (PET/AC/FR) polyacrylic coatings, before and after 1, 5, 10 & 15 wa...