Thermodynamic Analysis For Performance Improvement of Power Plant By Flue Gas Heat Recovery System
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
This analysis shows that how the performance of a thermal power plant can be improved by utilization of waste exhaust flue gas energy. In a power plant, most of the heat loss is from the high-temperature flue gas leaving the boiler. To minimize these heat losses, two flue gas heat recovery systems are proposed. The waste heat of flue gas is used for regenerative heating in the heater. This reduces steam extraction from steam turbine and more power is generated. The waste heat recovery of flue gas decreases coal consumption whose utilization is related to environmental issues. This paper presents a thermodynamic analysis of a reference thermal power plant with a rated power of 500 MW to determine the change in power plant output after the proposed systems.
Authors and Affiliations
ANIRUDH CHAWLA, SHUBHAM SHARMA
Keywords
Related Articles
- EP ID EP279991
- DOI 10.24247/ijmperdfeb201863
- Views 98
- Downloads 0
Design of a Four Throw Reciprocating Compressor Frame for Natural Gas
A reciprocating compressor is a mechanical device that is used to increase the pressure of a gas by reducing its volume. Compressed natural gas (CNG) is a fuel, which can be used in place of gasoline, diesel fuel and pro...
Optimization of Process Parameters in Turning Operation of Austenitic Stainless Steel Rod using Taguchi Method and ANOVA
This research paper is an outcome of investigation made on the parameters those affects on austenitic stainless steel work piece roughness in the turning operation as a part of that the parameters involved in the operati...
Hybrid Optimization of WEDM Parameters to Predict the Influence on Surface Roughness and Cutting Speed for Ni-Based Inconel 600 Wrought Superalloy
ABSTRACT Non-conventional machining processes are the requirements of the fastest growing industries because of the precision, complex, intricate shape of the work material, higher tolerances and economically. WEDM is a...
The Microstructure and Characterization of TiN Coatings Prepared by Physical Vapour Deposition (PVD)
Titanium nitride (TiN) possesses excellent property as corrosion resistance, aesthetic appear Titanium nitride (TiN) is being used for coating materials on SS, Mild steel. Since many techniques are there amongst, reactiv...
Experimental Investigation on Hardness, Microstructure and Surface Roughness of Maraging Steel Parts Produced by Direct Metal Laser Sintering Technique
Direct metal laser sintering (DMLS) is an additive manufacturing technique used to fabricate metal parts directly from the computer- aided design (CAD) data without any further machining operations. The DMLS technique is...