Transducer based on surface plasmon resonance with thermal modification of metal layer properties

Abstract

With the purpose to improve such service characteristics of transducers on the basis of the surface plasmon resonance (SPR) as the sensitivity and stability, we have analyzed the influences of a structure and a relief of the surface of polycrystalline gold films, which are determined by technological conditions of their production and by the low-temperature annealing, on their optical characteristics, namely, the coefficients of refraction, extinction, and light scattering. It is shown that the mechanism of enhancement of the sensitivity of an SPR-based transducer consists in a decrease in the coefficient of extinction of a metal film, as the annealing temperature increases. At the optimum annealing temperature (120C), we observed the smoothing of a small-scale roughness of the gold film surface, which decreases the scattering of plasmons, favors the defectless formation of protective nano-sized layers, and enhances the sensitivity and stability of the operation of SPR-based transducers.

Authors and Affiliations

K. V. Kostiukevych

Keywords

Related Articles

Optical properties of thin erbium oxide films formed by rapid thermal annealing on SiC substrates with different structures

The comparative analysis of optical characteristics inherent to Er2O3/SiC and Er2O3/por-SiC/SiC structures has been performed. It has been shown that, regardless the substrate on which the Er2O3 film is formed, an increa...

Performance limits of terahertz zero biased rectifying detectors for direct detection

Performance limits of uncooled unbiased field effect transistors (FETs) and Schottky-barrier diodes (SBDs) as direct detection rectifying terahertz (THz) detectors operating in the broadband regime have been considered i...

The influence of the guest cavitations loading degree in fractal nanohybrids GaSe<β-cyclodextrin<FeSO4>> on the current passing and polarization processes. The giant “battery spin” effect at room temperature.

The investigation results of clathrate properties GaSeβ-cyclodextrinFeSO4 of the hierarchical architecture with the fourfold expansion at different degrees of a guest cavitations loading have been presented. Based on...

Effective polycrystalline sensor of ultraviolet radiation

Deposition of special thin layers with high and low resistance in space charge region of surface barrier photoconverters based on the p-Cu1.8S/n-CdS structure leads to a sufficient increase in photosensitivity and decrea...

ZnTe-based UV sensors

A р-ZnTe/n-CdSe heterojunction was used for making polycrystalline ZnTe-based UV sensors. The heteropair components have the same crystal structure and close lattice parameters. ZnTe and CdSe were grown using thermal eva...

Download PDF file
  • EP ID EP178238
  • DOI 10.15407/spqeo19.03.255
  • Views 87
  • Downloads 0

How To Cite

K. V. Kostiukevych (2016). Transducer based on surface plasmon resonance with thermal modification of metal layer properties. Semiconductor Physics, Quantum Electronics and Optoelectronics, 19(3), 255-266. https://europub.co.uk./articles/-A-178238