Two-mass Vibratory Conveyor-manipulator with Three-Component Electromagnetic Drive
Journal Title: Український журнал із машинобудування і матеріалознавства - Year 2016, Vol 2, Issue 2
Abstract
Vibratory conveyor with three-component oscillations provides the opportunity to move the piece goods and details for any trajectory on a plane. Phase difference between independent horizontal (longitudinal or transverse) and vertical (normal) oscillations releases elliptical vibration of conveyor in plane perpendicular to the conveyor’s track. Elliptical vibrations allow increasing conveying velocity and inclination angle of conveyor’s track in comparison with the simplest linear vibrations. Three-component oscillations of the conveyor’s track are implemented by independent exciters of oscillations in the direction of conveying (longitudinal oscillations), oscillations in the direction perpendicular to conveying in plane (transverse oscillations) and oscillations in the direction perpendicular to conveying plane (normal oscillations) with phase difference between them. Conveying velocity of details moving upon the track varies with the change of phase difference angle and reaches a maximum with a certain angle, depending on several parameters. When electromagnetic exciters of longitudinal and normal oscillations are turned on, conveying details move in longitudinal direction. When electromagnetic exciters of transverse and normal oscillations are turned on, conveying details move in transverse direction. When electromagnetic exciters of longitudinal and transverse oscillations are turned on, conveying details rotate around their axes. When all three exciters are turned on, conveying details move at any trajectory. The change in the ratio of longitudinal and transverse amplitudes and phase difference angles between them allows changing the trajectory of details moving on conveyor’s track, making them not only move forward but rotate as well. That’s why such conveyor can be called a manipulator. The resilient system of two-mass vibratory conveyor-manipulator with three-component oscillations should have elastic pliability in three mutually perpendicular directions. It includes four resilient elements; each of them consists of two latticed leaf springs, fixed at the right angle to each other. The working body with conveying track is joined with reactive frame by resilient elements. Electromagnetic drive includes four electromagnetic exciters of longitudinal oscillations, four electromagnetic exciters of transverse oscillations and one electromagnetic exciter of normal oscillations. The bodies of electromagnets are fixed on the reactive frame and their anchors are fixed on the working body of conveyor-manipulator. A block diagram of the electrical control of conveyor-manipulator is referred. A voltage is supplied from two phases of threephase electricity to the coils of electromagnets through diodes, auto-transformers, switches and phase-shifter. The amplitudes of oscillations are regulated with aid of auto-transformers, phase difference between them and the change of conveying modes are carried by switches and phase-shifter. The oscillating system of vibratory conveyor-manipulator has six degrees of freedom and respectively six frequencies of natural oscillation. The formulas for calculating the vibratory conveyor-manipulator’s frequencies of natural oscillation are derived. Vibratory conveyor-manipulator with three-component electromagnetic drive was designed and manufactured. Its research and testing show the possibility of conveying details and piece goods at any trajectory.
Authors and Affiliations
Іgor Vrublevskyi
Keywords
Related Articles
- EP ID EP183629
- DOI -
- Views 112
- Downloads 0
On Free Oscillations of a Quadratic Nonlinear Oscillator
A free oscillations of a system with one degree of freedom, caused either by the initial deviation from the stable equilibrium position or by the initial velocity provided by the oscillator in this position was considere...
Calculation of wave fields in a layered half-space with absorption based on the Thomson-Haskell method
This article is devoted to the development of calculation method of seismic waves on the free surface of a horizontally-layered half-space, which are perturbed by local sources. Previous obtained relations for scalar pot...
Cutter Force and Influence of Elastic Deformation of Technological System of Gear-Hobbing Machine on Precision of Radial-Circumferential Method of Gear Cutting
The relevance of the problem which is solved in this article has been substantiated. In modern machines and equipment, rotary motions which cannot be implemented without gear wheels and gear trains are always present. At...
Kinetics of High-Temperature Interaction of Titanium Alloys with a Carbon-Containing Gaseous Medium
Due to their excellent complex of physical, chemical, and mechanical properties, titanium alloys are unique materials for many branches of industry. An important feature of titanium is its high reactivity concerning the...
Investigation of the Carbide-tipped Tool Wear Hardened by Method of Aerodynamic Impact
Theoretical calculations and experimental studies of the influence of wear on the cutting process and the precision parameters of machining by hard alloys during milling are described in the article. The method of aerody...