Kinetics of High-Temperature Interaction of Titanium Alloys with a Carbon-Containing Gaseous Medium
Journal Title: Український журнал із машинобудування і матеріалознавства - Year 2018, Vol 4, Issue 1
Abstract
Due to their excellent complex of physical, chemical, and mechanical properties, titanium alloys are unique materials for many branches of industry. An important feature of titanium is its high reactivity concerning the interstitial chemical elements (oxygen, nitrogen, and carbon). The absorption of interstitial elements by titanium alloys causes change in physical and mechanical properties of alloys and articles which are made of them. It should be noted that the titanium alloys are classified, in particular, by the compositions of their structures. Investigations of titanium alloys of different structural compositions will enable us to take into account the influence of their features on the kinetics of their interaction with interstitial elements. Results of experimental investigations of the influence of a carbon-containing gaseous medium on the kinetics of interaction of titanium alloys of different structural classes (α-, pseudo-α, and (α+β)) are presented in this paper. It is established that the interaction at high temperatures (T = 750…850°C) of titanium alloys with rarefied carbon-containing gaseous medium (Ar+16.7% C3H8) under a pressure of P = 0.116 Pa leads to the increase in mass of the specimens according to a law which is close to linear dependence on time.
Authors and Affiliations
Vasyl Trush, Alexander Luk’yanenko
Keywords
Related Articles
- EP ID EP498007
- DOI 10.23939/ujmems2018.01.029
- Views 137
- Downloads 0
Regulation of the phase-structural composition and metastability of austenite by alloying elements and parameters of tempering for increase wear-resistance of Fe-Cr-Mn deposited steel
It is shown that under the influence of alloying (Cr, Mn, C, Si, Ti, N, V) during electric arc hardfacing with a flux cored wire, as well as technological tempering parameters at temperatures of 300...700°C, the phase-st...
Micromechanical Properties and Thermal Annealing of Zinc Oxide Bulk Ceramic
Zinc oxide has numerous commercial device applications. Polycrystalline ZnO varistors, for example, are widely used in high voltage and power-related applications in industries such as microelectronics. One of the ways t...
Prospects of Use of Vibratory Devices with Electromagnetic Drives for Massive Piece Goods Conveying
Vibratory conveying devices with electromagnetic drive are widely used in the different branches of industry. As a rule, they deal with relatively small piece goods and are not suitable for conveying of the large massive...
Two-mass Vibrating Conveyer with Nonparallel Flat Springs
The analysis of operation of vibrating conveyers with nonparallel placement of flat springs is carried out. The motion of mechanical oscillating system is investigated. The structure of the supporting unit for flat sprin...
Kinetics of High-Temperature Interaction of Titanium Alloys with a Carbon-Containing Gaseous Medium
Due to their excellent complex of physical, chemical, and mechanical properties, titanium alloys are unique materials for many branches of industry. An important feature of titanium is its high reactivity concerning the...