Prospects of Use of Vibratory Devices with Electromagnetic Drives for Massive Piece Goods Conveying
Journal Title: Український журнал із машинобудування і матеріалознавства - Year 2017, Vol 3, Issue 2
Abstract
Vibratory conveying devices with electromagnetic drive are widely used in the different branches of industry. As a rule, they deal with relatively small piece goods and are not suitable for conveying of the large massive goods with high productivity. The conveying of massive piece goods needs the using of non-hopping modes of moving in which the high velocity can be reached only in the case of non-linear vibration trajectories of the conveying track, for example elliptical trajectories. Such trajectories are obtained by using of the independent drives of horizontal and vertical oscillations. Even greater velocity can be reached by using biharmonic vertical oscillation with particular optimal relations between amplitudes and phase differences of the component oscillations. These types of devices can be designed on a basis of three-mass oscillating system. Theoretical and experimental investigations show that the goods’ mass change significantly affects the vertical oscillations and weakly affects the horizontal oscillations. And at the certain relations between masses ratio and resonant tuning (ratio of frequencies of forced and natural oscillations) the vertical oscillations of active mass of two-mass vibratory device are insensitive to the change of goods’ mass. The sensitivity of vibratory conveying stability to the goods’ mass change was investigated for two-mass vibratory devices with elliptical oscillations. Three-mass oscillating systems with biharmonic oscillations in the point of view of the sensitivity to the goods’ mass changing were not considered. Analysis of different three-mass oscillating systems with electromagnetic drives of harmonic horizontal and biharmonic vertical oscillations allows determining two most preferable versions. The equations for amplitudes of components and frequencies of natural oscillations determining are derived. From the condition of insensitivity to conveying mass change the optimal relations between masses ratio and resonant tuning are obtained.
Authors and Affiliations
Іgor Vrublevskyi
Keywords
Related Articles
- EP ID EP281287
- DOI 10.23939/ujmems2017.02.079
- Views 101
- Downloads 0
Corrosion-mechanical resistance of arc-sprayed coatings made from cored powders
Result of investigations of resistance against corrosion and mechanical resistance of obtained by means of arc-spray metallization (with the use of cored wires) coatings are presented. The cored wires (CWs) enable us to...
Electromechanical Model of Machine for Vibroabrasive Treatment of Machine Parts
A lot of operations on trimming clean and finishing – stripping up treatment, first of all, removing of burrs, rounding and processing of borders, until recently time was carried out by hand, and hardly exposed to automa...
Two-mass Vibratory Conveyor-manipulator with Three-Component Electromagnetic Drive
Vibratory conveyor with three-component oscillations provides the opportunity to move the piece goods and details for any trajectory on a plane. Phase difference between independent horizontal (longitudinal or transverse...
Prospects of Use of Vibratory Devices with Electromagnetic Drives for Massive Piece Goods Conveying
Vibratory conveying devices with electromagnetic drive are widely used in the different branches of industry. As a rule, they deal with relatively small piece goods and are not suitable for conveying of the large massive...
Mag-Welding of Repair Structures of Main Gas Pipelines
Investigations on the development of a basic technology of the shielded-gas mechanized arc welding of strengthening structural elements which are used in repair of main gas pipelines were carried out. It is shown that th...