WASTE WATER ANALYSIS FROM A NEW GREEN PRETREATMENT OF COTTON FABRICS
Journal Title: Annals of the University of Oradea. Fascicle of Textiles, Leatherwork - Year 2018, Vol 0, Issue 2
Abstract
In the current context of sustainable development and environmental protection, finding and applying green technologies for textile finishing of cellulosic materials is a priority, being among the main objectives of current researches. Bioscouring treatment is one of the green processes for treating cellulosic textile materials that has successfully replaced classic alkaline treatment. Waste waters resulting from bio preparation are considered biodegradable and with low toxicity unlike alkaline treatment. An analysis and characterization of residual waters from the finishing processes is necessary in order to establish optimal parameters for disposal and low environmental impact, for reducing costs of waste water treatment and for efficient recovery and re-used. The paper presents a characterization of water resulted from a new bioscouring treatment of cotton fabrics using a commercial enzymatic product in ultrasound with sodium citrate as a chelating agent in comparison with bioscouring treatment were EDTA was and alkaline classical treatment. The main quality indicators of the residual waters analyzed were: pH, turbidity, conductivity, TSD, salinity, dry residue, total oxygen dissolved and chemical oxygen demand (COD-CCOMn). After analyzing the obtained data, similar values were observed for the two enzymatic treatments except the pH value which was lower for the process were EDTA was used, requiring a slight correction. For classical alkaline treatment, the obtained values exceeded the allowed limits for almost all analyzed parameters.
Authors and Affiliations
Mihaela DOCHIA, Simona GAVRILAȘ, Monica PUSTIANU, Cristian MOISĂ, Dorina CHAMBRE
Keywords
Related Articles
- EP ID EP432408
- DOI -
- Views 116
- Downloads 0
THE INFLUENCE OF THE NUMBER OF RIPPLE OF POLYACRYLONITRILIC FIBERS COTTON TYPE ON YARN PROPERTIES
In this study we aimed the influence of the number of undulations of polyacrylonitrile fibers, cotton type, on the properties of yarns with Nm50/1 fineness, made on BD 200 the rotor spinning machine. Rotor spinning of th...
DIVERSIFICATION OF A SAFETY FOOTWEAR PRODUCT
Product diversification is a usual strategy of footwear producers. As a requirement related to competitiveness in this domain, diversification can be done by practical application of some criteria. Considering this aspec...
MANUFACTURING OF TUBULAR LENO FABRICS BY MODIFIED STANDARD SAMPLING LOOM
Leno fabric pattern was first developed at the beginning of the 1900’s. Leno weaving structures, which are net-like porous, also called gauze, cross or doup weave. There are several types of leno fabrics which included p...
CONTRIBUTIONS TO THE CALCULATION OF NORM TIME EDGE THINNING OPERATIONS PARTS OF FOOTWEAR
It is known that regulations allow the introduction in production regimes efficient operation of equipment and methods of rational organization of production. To ensure accuracy imposed regulations must meet the followin...
JOB SATISFACTION OF TEXTILE INDUSTRY EMPLOYEES IN REPUBLIC OF SERBIA
Successful companies, including textile companies dealing with certain problems, are conditioned by an optimal combination of material and nonmaterial factor directed towards employee motivation. Employee motivation is v...