ABOUT THE IN FLUENCE OF AMBIENT TEMPERATURE ON THE READINGS OF MEDICAL PURPOSE THERMOELECTRIC SENSORS
Journal Title: Сенсорна електроніка і мікросистемні технології - Year 2018, Vol 15, Issue 1
Abstract
The paper presents the design, operating principle and technical characteristics of thermoelectric device for treasuring temperature and heat flux density which involves connection to personal computer for storage, processing and visualization of measurement results in real time. The results of studies of heat flux density and skin surface temperature of mammarygl and as a function of ambient temperature are presented. Then fluence of ambient temperature on the readings of medical purpose thermoelectric sensors is established. Then tensity of correlation and regression relationship between heat flux density and skin surface temperature of mammarygl and is determined.
Authors and Affiliations
L. I. Anatychuk, O. I. Ivashchuk, R. R. Kobylianskyi, I. D. Postevka, V. Yu. Bodiaka, I. Ya. Hushul, Yu. Ya. Chuprovska
STRUCTURE AND OPTICALLY PROPERTIES OF THE ZNSO LAYERS PREPARED BY THERMAL OXIDATION OF ZNS THIN FILMS
We have grown ZnS thin films by means of the radiofrequency (RF) magnetron sputtering technique onto c-Al2O3 and Si substrates at a temperature of 300°С. An effect of thermal annealing on air in a temperature range from...
SUB-THZ/THZ RADIATION DETECTOR DEVICE BASED ON SI-MOSFET
A sub-THz/THz radiation detector device based on Si-MOSFET has been presented. Si-MOSFET source and gate connected to an antenna serves as a detector element. Geometry of the Si-MOSFET antenna, principle of device operat...
GAS SENSORS BASED ON ORGANIC-INORGANIC NANOCOMPOSITES
The use of nanocrystals with large specific surface in sensor structures provides their high sensitivity to molecules of adsorbed gases. The aim of the work was to create sensor elements based on composite films of poly-...
TECHNOLOGICAL ASPECTS OBTAINING OF THE THERMOELECTRIC PBTE
The results of the research of phase composition and structural state of synthesized by various technological factors polycrystalline ingots of undoped lead telluride and made based on them samples by pressing the powder...
DUAL-PORT SAW SENSOR WITH ZNO NANORODS AS SENSING ELEMENT
Highly-sensitive dual-port SAW sensor on 128YX – LiNbO3 substrate with sensing element based on ZnO nanorods was proposed in the research. Low-temperature ZnO nanorods synthesis technology was developed, morphometric cha...