ADAPTIVE SYSTEM OF ASYNCHRONOUS MOTOR MODES OPERATING
Journal Title: Вісник Кременчуцького національного університету імені Михайла Остроградського - Year 2017, Vol 1, Issue 104
Abstract
Purpose. To investigate the development of a digital control system for an asynchronous motor that fulfills the operating modes specified by the operator with a possible deviation of the rotational speed of no more than 3% and provides a dynamic correction of the asynchronous motor control algorithm that excludes electric and mechanical overloads for typical operating modes. Methodology. Analytical research, analysis, synthesis, experimental research have been used. Findings. Modern automated control systems for asynchronous motors in order to ensure the maximum correspondence of the induction motor operation modes to an operator-specified algorithm use various types of feedback, for example, at the current speed and current in the winding, which makes the "control system-asynchronous motor" complex sufficiently adaptive. Such systems must take into account short-term and smooth changes in shaft load, transition to increased and lower rotational speed, provide controlled start, reverse and re-start. In this case, it is also necessary to monitor the maximum values of the current in the windings for a given type of induction motor. Originality. A method for controlling the performance characteristics of an asynchronous motor, ensuring maximum correspondence of the operating modes to the algorithm specified by the operator, taking into account feedback signals on the rotation frequency and current in the motor winding has been proposed. Practical value. An algorithm for the operation of an asynchronous motor control system using a digital method for synthesizing control signals, taking into account changes in external operating conditions, has been developed. Priorities of mechanical and electrical parameters of the "control system - asynchronous motor" complex have been determined, which allowed achieving a high degree of adaptability. Conclusions. The time for the instantaneous perturbation proposed by the system, for example, the jerk of the load on the shaft of an asynchronous motor, is not more than 10ms, and the relative deviation from the regime set by the operator is less than 1%.
Authors and Affiliations
М. Kulik, О. Razancev, А. Syanov
Keywords
Related Articles
- EP ID EP659588
- DOI -
- Views 58
- Downloads 0
EXTREME EFFECTIVE CONTROL OF CONTINUOUS RAW MATERIAL PROCESSING
Purpose. The purpose of the article is to research automation of optimum search of modes by maximal efficiency criterion for technological equipment with raw material processing. This is realized by using of extreme mana...
INTRODUCTION OF COMBINED RELAY PROTECTION SYSTEMS IN DISTRIBUTION ELECTRIC NETWORKS 6-10 kV
Purpose. Development of circuit solutions for relay protection and automation devices that have low cost and low power consumption in comparison with microprocessor and traditional systems. Ensuring reliable relay protec...
A MANUFACTURING METHOD OF THE STABILIZING WORKING OF DIES FOR THE PULSED STAMPING
Purpose. To development and select the method of the hardening-stabilizing treatment of the die mirror for the hydroexplosive stamping of thin sheet parts of a closed form. Methodology. The determination of new technolog...
THE METHODOLOGICAL APPROACHES IMPROVEMENT OF ENVIRONMENTAL EFFICIENCY OF DRAINED LANDS NATURAL RECLAMATIVE REGIME EVALUATION CRITERIA
Purpose. The problem of optimization of the reclamation regime of the drainage lands, which determine the overall environmental and economic effects of implementation of measures to enhance their adaptive capacity in the...
ANALYSIS OF FOREIGN TRADE TRENDS WITH SPECIAL REGARD TO THE TRADE OF HUNGARY AND ITS NEIGHBOURING COUNTRIES
Purpose. Trade has always been the engine of growth. With increased trade openness, its role in world economy is are important than ever. After reviewing the development of trade and commercial theories, and analysing tr...