Additive manufacturing of bone scaffolds
Journal Title: International Journal of Bioprinting - Year 2019, Vol 5, Issue 1
Abstract
Additive manufacturing (AM) can obtain not only customized external shape but also porous internal structure for scaffolds, both of which are of great importance for repairing large segmental bone defects. The scaffold fabrication process generally involves scaffold design, AM, and post-treatments. Thus, this article firstly reviews the state-of-the-art of scaffold design, including computer-aided design, reverse modeling, topology optimization, and mathematical modeling. In addition, the current characteristics of several typical AM techniques, including selective laser sintering, fused deposition modeling (FDM), and electron beam melting (EBM), especially their advantages and limitations are presented. In particular, selective laser sintering is able to obtain scaffolds with nanoscale grains, due to its high heating rate and a short holding time. However, this character usually results in insufficient densification. FDM can fabricate scaffolds with a relative high accuracy of pore structure but with a relative low mechanical strength. EBM with a high beam-material coupling efficiency can process high melting point metals, but it exhibits a low-resolution and poor surface quality. Furthermore, the common post-treatments, with main focus on heat and surface treatments, which are applied to improve the comprehensive performance are also discussed. Finally, this review also discusses the future directions for AM scaffolds for bone tissue engineering.
Authors and Affiliations
Youwen Yang, Guoyong Wang, Huixin Liang, Chengde Gao, Shuping Peng, Lida Shen and Cijun Shuai
Keywords
Related Articles
- EP ID EP678693
- DOI -
- Views 166
- Downloads 0
Utilising inkjet printed paraffin wax for cell patterning applications
We describe a method to prepare patterned environments for eukaryotic cells by inkjet printing paraffin wax onto a substrate. This technique bypasses the requirement to create a master mould, typically required with the...
Application of piezoelectric cells printing on three-dimensional porous bioceramic scaffold for bone regeneration
In recent years, the additive manufacture was popularly used in tissue engineering, as the various technologies for this field of research can be used. The most common method is extrusion, which is commonly used in many...
Laser-assisted bioprinting at different wavelengths and pulse durations with a metal dynamic release layer: A parametric study
For more than a decade, living cells and biomaterials (typically hydrogels) are printed via laser-assisted bioprinting. Often, a thin metal layer is applied as laser-absorbing material called dynamic release layer (DRL)....
Three-dimensional-printing for microfluidics or the other way around?
As microfluidic devices are designed to tackle more intricate tasks, the architecture of microfluidic devices becomes more complex, and more sophisticated fabrication techniques are in demand. Therefore, it is sensible t...
Electrospun 3D multi-scale fibrous scaffold for enhanced human dermal fibroblasts infiltration
Electrospun polymeric nanofibrous scaffold possesses significant potential in the field of tissue engineering due to its extracellular matrix mimicking topographical features that modulate a variety of key cellular activ...