Ag-induced a New Raman Mode in ZnO Microrods
Journal Title: Materials Science-Medžiagotyra - Year 2019, Vol 25, Issue 3
Abstract
The chemical vapor deposition technique was used to prepare the Ag doped ZnO microrods, which were located on Si substrates at two different positions. The scanning electron microscopy revealed that the samples have a clear hexagonal shape. X-ray diffraction provided information about the preferential orientation along the c-axis. The Raman analysis revealed that a new Raman mode appears at 492 cm-1 due to Ag doping. As this mode has not been reported early, it could be used as a characteristic mode of Ag doping in Raman spectrum. The red shift of the E2 (high) mode proves the existence of tensile stress in the samples.
Authors and Affiliations
Lina Wang, Jing Wang, Meina Wang, Dan Zhou, Yan Mei, Wenzhuo Huang, Tian Xing, Shengxu Ge, Yuntong Chen, You Yu, Zhongqi Luan, Bing Qu, Yaxiang Bai, Chao Pan, Delong Tang, Na Zhu, Yu Qiu, Lizhong Hu
Keywords
Related Articles
- EP ID EP615494
- DOI 10.5755/j01.ms.25.3.19130
- Views 50
- Downloads 0
Biodegradation of Wood Treated with Copper Based Preservative by Two Dematiaceous Fungi: Alternaria Tenuissima and Ulocladium Consortiale
As cases of treated wood colonization by fungi still happen, the understanding of fungal survival abilities could contribute in the creation of new efficient preservatives. For that reason, two dematiaceous fungi Alterna...
Optimum Control Parameters During Machining of LM13 Aluminum Alloy Under Dry Electrical Discharge Machining (EDM) With A Modified Tool Design
Dry Electrical Discharge Machining(EDM) is considered as a green manufacturing process in which the liquid dielectric medium is replaced by a high velocity gas, which results improved process stability. A special tool de...
Effect of Stir Casting Process Parameters on Properties of Aluminium Composites – Taguchi’s Analysis
The need for lightweight materials in various industries, increased fuel price, requirement of improved mechanical, thermal properties leads to the development of aluminium metal matrix composites. Stir casting method is...
Dependence of Electrical and Optical Properties of Sol-gel-derived SnO2 Thin Films on Sb-substitution
In the present work, Sb-doped SnO2 (ATO) thin films were deposited on Si substrates by spin-coating method and the influence of Sb-doping on surface roughness, structural, optical and electrical properties has been inves...
Performance Characteristics of Hot-dip and Plasma Spray Aluminide Coated Nickel-Based Superalloy 718 under Cyclic Oxidation in Water Vapour
Aluminium coating due to its ability to form stable alumina oxide scale are commonly used to protect materials such as inconel 718 superalloys at high operational temperatures. Relevant properties of the oxide scale form...