Analysis of Intelligent Control and Interface in Pressurized Liquid Injection Systems for Competitive Technical Solutions
Journal Title: HIDRAULICA - Year 2018, Vol 0, Issue 2
Abstract
In this scientific paper, am approach based on Engine Digital Scanning (EDS) was applied in order to underline the performances of more than ten engine speed regimes on the same rally car, but with various intake manifold pressures, fuel injection duties and ignition advances. A specific study of trend lines and parameter variation was developed to highlight internal combustion engine’s (ICE) operational indicators and to define the optimal regime with increased intake pressure, improved combustion and lower pollution influencing conditions. Manifold pressure dictates the base condition for air-fuel mixture formation and for lambda value before engine intake process in the case of port fuel injection (PFI). Fuel injection duty expresses the operational sequence time in relation with a base parameter in the engine working process. Ignition advance is adapted to the hydraulic-fuel charge, as well as engine load and speed so it is analysed.
Authors and Affiliations
Iosif FERENTI, Dan OPRUTA, Doru-Laurean BALDEAN
Keywords
Related Articles
- EP ID EP483550
- DOI -
- Views 201
- Downloads 0
A Method to Address the Fixing of Sealing Deficiencies at the “Ostrovul Mic” Left Bank, “Râul Mare - Downstream” Water Development
The present paper proposes a method for approaching the remediation of sealing deficiencies from the left bank of Ostrovul Mic water reservoir at km1+300 (Raul Mare – Downstream water development) by executing a drain at...
Technological and Constructive Considerations on the Realization of Components and Parts Using 3D Printing FDM-Type Technology
The work is addressed both the constructive considerations and the analysis of specific deformations generated by gaseous or liquid medium on specific components of the pneumatic or hydraulic installation. The work is st...
Design and Optimization of Pressurized Toroidal LPG Fuel Tanks with Variable Section
This study addresses the design and optimization of the pressurized toroidal LPG fuel tanks with variable section used in automotive industry based on the finite element analysis (FEA) approaches, to model both thermal a...
Theoretical Aspects regarding the Pressure Safety Valves Operation within a Hydraulic Circuit
Construction and agricultural machinery and equipment drives are currently accomplished by means of high-performance hydraulic and pneumatic systems through which difficult workloads are easily performed. Such systems ha...
Numerical Simulation of Thermal Processes Occurring at Testing Hydrostatic Pumps in Cavitation Mode
This article refers to the use of infrared thermography in the predictive maintenance of hydraulic drive systems. Based on experimental research on the temperature evolution in a hydraulic system which operates in cavita...