APPLICATION OF ELECTRONIC SPECKLE PATTERN INTERFEROMETRY TO MEASURE THERMAL STRAINS OF THIN LAYERED STRUCTURES
Journal Title: ROMANIAN JOURNAL OF TECHNICAL SCIENCES - APPLIED MECHANICS - Year 2015, Vol 60, Issue 3
Abstract
Applications of the Electronic Speckle Pattern Interferometry (ESPI) for the determination of the coefficient of thermal expansion (CTE) and thermal behaviour of a thin layered foils is investigated in this paper. A heating system was designed for applying thermal load and ESPI technique delivers the full-field thermal deformation fields of the test sample due to the change in temperature. The normal strain is calculated for full-field analysis of thermal expansion of the specimen. For validation, the CTE of an aluminium sample is determined and compared with the textbook value, validating the proposed experimental set-up and the sensitivity and accuracy of the applied experimental technique. The CTE and stress concentration at interface due to thermal loads of a layered thin structure consisting of two different materials is measured. The results reveal that the ESPI is a proper and effective tool for full-field thermal behaviour analysis and CTE measurement.
Authors and Affiliations
MIRCEA CRISTIAN DUDESCU
HOT AIR ENGINE, DEVELOPED AND PATENTED BY TRAIAN VUIA, A ROMANIAN PERFORMANCE FOR 21st CENTURY
After thoroughly researching data from national archives, libraries, and important technical studies from Romania and abroad, I concluded that the hot air and closed-circuit engine built, tested, and patented by Romanian...
CALIBRATION OF GTN DAMAGE MODEL PARAMETERS USING HYDRAULIC BULGE TEST
In this research, a new approach has been introduced for the identification of GTN damage model parameters. The response surface methodology was used for design of experiments and also for the calculation of the optimum...
THE CHEMISTRY OF THE RAW WATER TREATED BY AIR-JET ULTRASOUND GENERATOR
The paper presents the sonic treatment effect on the main chemical indicators of the raw water. Also, the paper presents the air-jet ultrasound generator and the experimental laboratory installation for sonic treatment,...
HUMAN-ROBOT INTERACTION AND TRACKING USING LOW COST 3D VISION SYSTEMS
This paper describes a platform which allows humans to interact with robotic arms using augmented reality. Low cost “kinect” cameras (Xbox 360) are used for tracking human skeletons and locations of robot’s end effectors...
TRENDS IN SURGICAL ROBOTICS
Surgical Robotics today is essentially about two families of devices, namely telemanipulators and simulators for mini-invasive (endoscopic) procedures. In both cases, the user-interface, i.e. the “joystick” to be manipul...