Approach to the determination of the technical state of building structures under force and high-temperature influences
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2018, Vol 1, Issue 71
Abstract
The analysis of literary sources and statistical data is carried out. Most of the emergencies arise due to the unsatisfactory technical condition of structures, equipment and engineering networks and their significant deterioration as a result of the expiration of the normative period of operation, failure to comply with regulatory volumes of planned preventive repairs, violation of the operating regulations and insufficient reliability of operation in conditions of extreme natural phenomena. The paper proposes a new approach to the determination of the technical state of structures under force and high-temperature influences. The approach will allow, based on the analysis of the technical and regulatory documentation, to establish parameters and criteria of the technical condition, analyze possible failures and damages, conduct a survey of structures and draw conclusions about the technical condition in which the structures are located. It is advisable to determine the technical condition of the used building designs on the basis of the results of the survey, with the subsequent use of the results obtained for the simulation of the technical condition with the software ANSYS and verification of the calculation of the system «base – foundation – upper structure ». Calculations should be made taking into account possible combinations of power, deformation and high-temperature influences with the use of calculation schemes and models that fully reflect the specifics of the deformation of all elements of the system.
Authors and Affiliations
Y. А. , Otrosh
Keywords
Related Articles
- EP ID EP510727
- DOI -
- Views 118
- Downloads 0
A study of the of the local energy saving ventilation system effectiveness
Significance of energy saving technologies introduction in the design of new and modernization of old buildings is proved. Work of local energy saving ventilation system for the lecture hall of the University in terms of...
Microcracking and coefficient of tension intensity of expanded clay lightweight concrete on multicomponent binding
The results of experimental research of microcracking and coefficient of tension intensity of experimental patterns from expanded clay lightweight concrete on multi-component binding and quartz sand are given. Optimal co...
Mathematical model calculating the duration of construction
Improvement of the methodological principles of scheduling allows to solve the problems of exceeding the terms of construction. Compliance to the calendar plan of works has a direct impact on the construction`s duration...
Decorative constructional expanded clay lightweight concrete on cement slurry processing gravel
Mechanical properties and color range of decorative expanded clay lightweight concrete were investigated. Red and yellow iron-oxide synthetic pigments were applied. Structural expanded clay lightweight concrete was manu...
Fibre-reinforced decorative composite: the effects of composition on the strength
The paper continues to present the results of the study aimed at getting high performance decorative concrete. To the previously presented analysis of the influence of the composition on the growth process of the plastic...