Back Stretching Behaviors in V Bending
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2014, Vol 2, Issue 3
Abstract
The springback is difference between the die geometry and bended sheet geometry. This phenomena is a general shaping problem in sheet metal forming. In V bending, the numerous factors such as material (material type, thickness, anisotropy, yield strength, Young’s modulus, strain hardening etc.), process (holding time, bending temperature, friction, bending force etc.) and die geometry (bending angle, bending radius etc.) must be considered. Therefore, numerous empirical and finite element analysis studies have been carried out by many researchers. In this study, the related studies with V bending operation has been compiled and revived.
Authors and Affiliations
Yunus ASLAN, İbrahim KARAAĞAÇ
Keywords
Related Articles
- EP ID EP469946
- DOI -
- Views 126
- Downloads 0
Reduced Order Extended Kalman Filter based Parameter Estimation for Induction Motor Drives
In this study, a speed-sensored reduced-order extended Kalman filter (RO-EKF) based estimator is designed for direct vector control system of induction motors. The rotor resistance, stator resistance, and magnetizing ind...
Reliability Analysis of A Cantilever Beam with Circular Hole Depending on Stress-Concentration Factor By Using Monte Carlo Simulation Method
Stress-concentration factor (SCF) is known to be the ratio of the maximum experimental stress around the sudden change of the geometric shape to the theoretical nominal or reference stress. Recently, the investigation of...
Energy Saving in Industrial Annealing Furnaces
In this study, an energy efficiency studies have been carried out in a natural gas-fired rolling mill annealing furnace of an industrial establishment. In this context, exhaust gas from the furnace has been examined in t...
THE DEVELOPMENT OF MUTUAL INDUCTANCE COMPUTATION TOOL FOR WIRELESS POWER TRANSFER
Wireless power transmission systems, which aim to eliminate cable complexity and the difference between the connection terminals of devices, are now widely used in many areas such as mobile phone, toothbrush, shaver and...
Fuzzy Logic and PID control of a 3 DOF Robotic Arm
Nowadays, the robotic arms are used in many industrial applications. At this point, high precision control is required for robotics used in fields such as healthcare area. Therefore, the control method applied to robots...