Calculating Optimum Gear Ratios of Mechanical Driven Systems Using Three Step Bevel Helical Gearbox and Chain Drive for Minimum System Height
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
The current study is aimed at determining optimum gear ratios of mechanical driven systems using a three-step bevel helical gearbox and a chain drive. An optimization problem with the objective function as the minimum gearbox height was constructed. Six input parameters including the total system ratio, the face width coefficients of the bevel and the helical gear sets, the allowable contact stress and the output torque were discussed, and their effects on the optimum gear ratios were considered through the implementation of a simulation experiment. The findings revealed, the evaluation of the factor influences, moreover, the proposed equations indicated that the optimum gear ratios can be obtained with high precision.
Authors and Affiliations
Tran Thi Hong, Le Hong Ky, Nguyen Van Cuong, Nguyen Thanh Tu, Vu Ngoc Pi
Keywords
Related Articles
- EP ID EP671646
- DOI 10.24247/ijmperdoct201919
- Views 106
- Downloads 0
Operational Study of Circulating Fluidized Bed Steam Generator
The paper aims at studying the operation of a lignite fired Circulating Fluidized bed Combustion steam generatorof 250 MW capacity located at NeyveliinTamilnadu in South India. Circulating fluidized bed combustion(CFBC)...
Mechanical Behavior of AL 7075 Reinforced with Al2O3 and SIC Nano Particles Fabricated by STIR Casting Method
Demand increases in a global range of the new brand products at national and International level. The metal matrix Nano composites are highly useful in many applications such as aerospace, automobile, military and variou...
Optimization of PID Controller Gains of an Aircraft Pitch Control System Using Particle Swarm Optimization Algorithm
In this paper, a “Proportional-Integral-Derivative” (PID) controller used in a aircraft pitch control system is optimally tuned to control the output response so as to obtain a much more stable and optimized transient re...
Finite Element Analysis of Composite Material for Automotive Wheel Rim
Composite materials play a major role in weight reduction in automobile industry. Conventional material used for wheel rim is Aluminium alloy. Further weight reduction is achieved by use of magnesium alloy and composites...
Analysis of Customer Focused Steel Product Development by Using Quality Function Deployment
This paper gives a prospective view of QFD methodology and reach to product development. The intention is to enable the customers to initiate and interact with the product development process, which gives a competitive f...