CHOSEN TOXIC COMPONENTS OF EXHAUST GASSES EMISSION FOR DIFFERENT MEANS OF TRANSPORT
Journal Title: Scientific Journals of Silesian University of Technology. Series Transport - Year 2015, Vol 2015, Issue 87
Abstract
This article presents data that concerns emission of nitrogen oxides, hydrocarbons, carbon monoxide and particles by different transport means. The road, rail and air transport were taken into account. The data published in references were analysed. To compare freight and passenger road transport emission expressed in grams per kilometre was presented. The emission in mg per passenger-kilometre enabled comparison of cars trains and planes in terms of air pollutant discharge. The data comparison revealed significant differences between transport modes. For aviation significant influence of flight distance on emission was observed. For flights running evenly with a parallel of latitude also the direction – according or opposite to the Earth rotation is significant.
Authors and Affiliations
Mirosław WITASZEK, Kazimierz WITASZEK
Keywords
Related Articles
- EP ID EP89522
- DOI -
- Views 65
- Downloads 0
DETERMINATION OF TORSIONAL STIFFNESS OF HARMONIC DRIVE
The aim of this study was to develop a simplified method for determining the torsional stiffness of harmonic drive. For this purpose, in this paper the flexspline of harmonic drive is studied by dividing it into three di...
PROGRAMY SŁUŻĄCE DO OBLICZANIA PRZEPUSTOWOŚCI ORAZ OCENY FUNKCJONOWANIA ROND NA ŚWIECIE
Spośród programów służących do obliczania przepustowości rond w różnych krajach na świecie najczęściej stosowane są: Arcady, Rodel, Sidra, HCS-3, Kreisel, Girabase. Z tej grupy oprogramowania w Ameryce najczęściej stosow...
DYNAMICZNE MACIERZE PODRÓŻY W SIECIACH MIEJSKICH
W artykule przedstawiono metody wyznaczania macierzy podróży, ze szczególnym uwzględnieniem dynamicznego ujęcia problemu. Ze względu na potencjalne wykorzystanie metod wyznaczania macierzy podróży na podstawie wielkości...
THE TEST PROGRAMME CONCERNING AIRCRAFT POSITIONING AND TRAFFIC MONITORING – PART II
This paper presents the results of studies on the determination of an aircraft’s trajectory and positioning accuracy. The PPP method was applied to determine the aircraft’s position in kinematic mode for code observation...
MODELLING AND ANALYSIS OF THE MOBILE PLATFORM UNDER ITS WORK CONDITIONS
In this work the calculation model of mobile platform, type HAULOTTE - H1150E, and its strength analysis under work conditions have been completed. The model has been obtained by using finite element method with applicat...