Classification of Structure Defects of Metal Matrix Castings with Saturated Reinforcement
Journal Title: Archiwum Odlewnictwa - Year 2012, Vol 12, Issue 3
Abstract
Definition of a composite [1] describes an ideal composite material with perfect structure. In real composite materials, structure is usually imperfect – composites contain various types of defects [2, 3–5], especially as the casted composites are of concern. The reason for this is a specific structure of castings, related to course of the manufacturing process. In case of metal matrix composite castings, especially regarding these manufactured by saturation, there is no classification of these defects [2, 4]. Classification of defects in castings of classic materials (cast iron, cast steel, non-ferrous alloys) is insufficient and requires completion of specific defects of mentioned materials. This problem (noted during manufacturing metal matrix composite castings with saturated reinforcement in Institute of Basic Technical Sciences of Maritime University Szczecin) has become a reason of starting work aimed at creating such classification. As a result, this paper was prepared. It can contribute to improvement of quality of studied materials and, as a consequence, improve the environment protection level.
Authors and Affiliations
K. Gawdzińska, D. Nagolska, M. Szweycer
Keywords
Related Articles
- EP ID EP72687
- DOI 10.2478/v10266-012-0077-y
- Views 97
- Downloads 0
Semi-solid processing method for cast iron
A device for the fabrication of ingots from cast iron of globular non-dendritic structure of the primary phase was designed and made, using the principle of overflow on the Slope Cooling Plate, known as the SCP method....
New Look at the Process of Reclamation of Moulding Sands
This paper presents a new perspective on the issue of reclamation of moulding and core sands. Taking as a premise that the reclamation process must remain on the surface of grains some not separated binding materials res...
Application of Kaplan-Meier analysis in reliability evaluation of products cast from aluminium alloys
The article evaluates the reliability of AlSi17CuNiMg alloys using Kaplan-Meier-based technique, very popular as a survival estimation tool in medical science. The main object of survival analysis is a group (or groups)...
The influence of the conditions of gypsum plaster preparation on its technological properties
The results of researches on influence of basic preparation parameters, i.e. time and mixing intensity, start and end time of set, dimensional changes and strength of gypsum plaster, are presented in this paper. Determi...
Effect of modifying process on mechanical properties of EN AC-43300 silumin cast into sand moulds
Significance of alloy modification in course of casting process is the most explicitly visible on example of Al-Si alloys. Broad application of these alloys in foundry industry has become possible after invention of a me...