COMPARATIVE STUDY OF TECHNOLOGICAL AND FUNCTIONAL PROPERTIES OF CUTTING EDGES MADE OF CONVENTIONAL AND SINTERED HIGH SPEED STEEL
Journal Title: Archives of Mechanical Technology and Materials - Year 2015, Vol 35, Issue
Abstract
In the article selected fragments of investigations of technological properties of cutting edges made of conventional and sintered high speed steel with similar chemical composition are presented. Investigations of technological properties have comparative character and concern among other things estimation of chemical composition, hardness, structure and durability during toughening steel machining. At the end of article conclusions are presented.
Authors and Affiliations
Maciej Jan Kupczyk, Jędrzej Komolka
Keywords
Related Articles
- EP ID EP198805
- DOI -
- Views 81
- Downloads 0
The effect of changes in depth of cut and cutting speed of CNC toolpaths on turning process performance
In this article, a novel approach to computer optimization of CNC toolpaths by adjustment of cutting speed vc and depth of cut ap is presented. Available software works by the principle of adjusting feed rate on the basi...
THE QUALITY MODEL OF THE AWJ CUTTING PROCESS FOR ALUMINUM TYPE PA4 ALLOY
The article presents the quality model of the process of high-pressure abrasive waterjet cutting of aluminum alloy, type PA4, as well as the results of research that verified the accuracy of the determined dependence. Th...
Open loop control of piezoelectric tube transducer
This paper is focused on the open loop control of a piezoelectric tube actuator, hindered by a strong hysteresis. The actuator was distinguished with 22 % hysteresis, which hinders the positioning of piezoelectric actuat...
Design of The Test Stand for Hydraulic Active Heave Compensation System
The article presented here described the design of a test stand for hydraulic active heave compensation system. The simulation of sea waves is realized by the use of hydraulic cylinder. A hydraulic motor is used for sea...
Diagnostic methods of detecting defects within the material with the use of active infrared thermovision
Article presents the methods of detecting defects within material with the use of active infrared thermovision. During the study ABS and PVC samples were used inside which internal structure defects and defects of glue c...