THE QUALITY MODEL OF THE AWJ CUTTING PROCESS FOR ALUMINUM TYPE PA4 ALLOY
Journal Title: Archives of Mechanical Technology and Materials - Year 2015, Vol 35, Issue
Abstract
The article presents the quality model of the process of high-pressure abrasive waterjet cutting of aluminum alloy, type PA4, as well as the results of research that verified the accuracy of the determined dependence. The experimental works were performed on two experimental setups: machining AWJ center type RCT 32 by Resato company, as well as the prototype workstation constructed on the basis of plasma cut-off machine type TOPAZ-S by Eckert company. The geometric structure of the cut surfaces was measured using spatial profilometer Talysurf CLI 2000 equipped with a non-contact laser sensor. Nonlinear estimation module of Statistica program was used for qualitative development of the model of high-pressure abrasive aluminum alloy waterjet cutting process. The statistically elaborated dependence can be implemented in machine tool controllers designed for abrasive waterjet cutting of materials.
Authors and Affiliations
Marzena Sutowska
Keywords
Related Articles
- EP ID EP198780
- DOI -
- Views 73
- Downloads 0
FACE GEAR WITH AN INVOLUTE TEETH LINE IN APPLICATIONS FOR CLUTCH CONNECTIONS
The paper presents methods of forming a face gear with an involute teeth line in application for clutch connections. The method is based on application of a disc tool instead of application of a hob. The solution is poss...
Open loop control of piezoelectric tube transducer
This paper is focused on the open loop control of a piezoelectric tube actuator, hindered by a strong hysteresis. The actuator was distinguished with 22 % hysteresis, which hinders the positioning of piezoelectric actuat...
Comparison of selected surface topography parameters after the turning of Inconel 625 obtained by the additive techniques to the parameters of the material made by the traditional techniques
The paper presents the possibilities of additive manufacturing of the selected alloy, Inconel, for production of ready-made elements. The results of surface topography examination of the material manufactured with the us...
AN OVERVIEW OF SELECTIVE LASER SINTERING TECHNOLOGIES
This paper presents an overview of the selective laser sintering (SLS) process of various materials. The influence of distinct scanning patterns and SLS process input parameters (e.g.: scanning rate, laser power, hatchin...
COMPARATIVE STUDY OF TECHNOLOGICAL AND FUNCTIONAL PROPERTIES OF CUTTING EDGES MADE OF CONVENTIONAL AND SINTERED HIGH SPEED STEEL
In the article selected fragments of investigations of technological properties of cutting edges made of conventional and sintered high speed steel with similar chemical composition are presented. Investigations of techn...