COMPARISON OF FRICTION EFFECTS IN THE ENVIRONMENT WITH USING ALGORITHM, WHICH IS BASED ON THE EQUATIONS OF PRESSURE OR DENSITY AT STUDY OF TURBOFAN MODEL
Journal Title: Проблеми тертя та зношування - Year 2017, Vol 76, Issue
Abstract
Using mathematical models for describing of characteristics of engine noise requires careful selection of the methods, what used during the modeling. That’s why it is necessary to compare and find those equations that make the best describing of flow parameters such as friction medium impact on the character of the flow, to ensure the adequacy of the data. This work compares two methods that are based on the equations of pressure and density equations that may describe a great variety of tasks in modified state
Authors and Affiliations
M. I. KISLYAK
Keywords
Related Articles
- EP ID EP366364
- DOI -
- Views 56
- Downloads 0
ENSURING OF THE WORK RELIABILITY OF COMPACT-SIZED VALVES WITH TWO-POSITIONED POLARIZED ELECTROMAGNETIC DRIVE
Using the results of conducted recourse tests, the main changes of technical condition in the elements of compact-sized pneumatic valves with two-positioned electromagnetic drive were revealed. The connections between th...
ENERGYLOADING OF THE FRICTION PAIRS IN THE DISC BRAKING DEVICES
The process of friction in metal-polymer friction pairs of disk brakes refers to the high-energy phenomena. For its realization need to supplies large amounts of energy from the outside. For the electrodynamic, and as a...
WEAR OF STEEL CHROMOSALUMINIZED 12Х18N10T IN FRICTION SLIDING UNLUBRICATED
The structure, phase and chemical composition, microhardness of the surface bands are 12Х18N10T after chromoaluminizing chromoaluminizing. It is shown that the wear resistance stali 12Х18N10T in sliding friction without...
APPLICATION OF CAST OPEN-CELL POROUS ALUMINUM FOR SELF-LUBRICATING BEARINGS
Applicability of cast open-cell porous Al for the use as porous 'self-lubricating bear- ings' was studied experimentally using tribological tests. Samples of open-cell porous Al have been produced by casting the melt of...
INCREASE WEAR-RESISTANCE OF MACHINE PARTS BY REPLACING CARBURIZATION WITH CARBO CROME PLATING
An experiment was conducted to add chromium powder to the composition of the reaction mixture during cementation. The temperature-time characteristics of the carbo chrome plating process correspond to the standard parame...