Determination of climatic loads by meteorological data during verification calculations of load-bearing structures
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2017, Vol 1, Issue 68
Abstract
The characteristic values of climatic loads in the design point are determined with considering of the data of the nearest meteorological stations. The possibility of combining of the annual maxima samples, statistical characteristics, or characteristic load values is verified by dispersion analysis procedure. The developed algorithms of calculation are a modification of the dispersion analysis method. By the example of real meteorological data of four climatic loads the optimal method for selecting weather stations is found, which ensures taking into account the maximum possible number of homogeneous data. The method of combining the characteristic values of loads takes into account smaller amounts of meteorological data and therefore it is recommended to use only in the absence of array of maximum load values or their numerical characteristics. The method of forming a local network of weather stations and the homogeneity checking of the data of the selected weather stations is developed. It is suitable for use in the verification calculations of the constructions that are in operation.
Authors and Affiliations
G. B. , Filimonikhin, M. V. , Pashynskyi
Keywords
Related Articles
- EP ID EP325919
- DOI -
- Views 145
- Downloads 0
Approach to the determination of the technical state of building structures under force and high-temperature influences
The analysis of literary sources and statistical data is carried out. Most of the emergencies arise due to the unsatisfactory technical condition of structures, equipment and engineering networks and their significant de...
Study of the influence of the hardening temperature on the change of strength during compression of modified expanded clay lightweight concretes
The article presents the results of the study of the effect of hardening temperature on the change of strength during compression of modified lightweight concretes. The analysis of the results shows that concretes based...
Decorative constructional expanded clay lightweight concrete on cement slurry processing gravel
Mechanical properties and color range of decorative expanded clay lightweight concrete were investigated. Red and yellow iron-oxide synthetic pigments were applied. Structural expanded clay lightweight concrete was manu...
Classification of damages and imperfections of joints in steel structures under dynamic loading action
The places with a high level of stresses are the main reason of fatigue cracks appearance in joints of steel structures under dynamic loading. Modern normative classification tables in general have no numeric description...
The effectiveness of use of cellulose ethers in mortars based on alkali-activated slag cement for self-levelling screeds
Generally, water-retaining admixtures based on cellulose ethers are developed for traditional binders (Portland cement and gypsum) systems. However, alkali-activated cements are characterized by an increased alkalinity o...