Determining of the optimal geometric shape of the combined arch system grid
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2017, Vol 1, Issue 66
Abstract
The question of the geometric shape of flexible elements grid designation in a combined arch system guided by the condition of its operability and the minimum consumption of the material structure is investigated in the article by the author. At this stage, this issue is supposed to be solved by using the geometric shape of the grid, without resorting to the preliminary tension of its elements. To determine the geometry of the grid, evenly distributed over half of the span in proportion to the evenly distributed throughout the span loads are taken, because this combination of loads can cause the compressive efforts in some elements of a flexible grid. The performed studies showed that the optimal shape of the grid does not depend on the upper belt number of panels, but depends only on the ratio of the values of the constant and time loads. The obtained results of the investigation make possible to define the grid geometric shape of the combined arch system by taking into account the given ratio of constant and time loads in such a way that all elements of the flexible grid will work on tension, and the consumption of the material of structures will be the lowest.
Authors and Affiliations
P. M. , Singayevsky
Keywords
Related Articles
- EP ID EP314873
- DOI -
- Views 136
- Downloads 0
Evaluation criteria of engineering and planning solutions of roundabouts
This article presents the results of the research of selection criteria for the evaluation of engineering and planning solutions of roundabouts, the advantages of the placement of roundabouts are presented. Different app...
Peculiarities of constructing of a protective seawall on water bearing soft soils
A technological sequence error of constructing a facility on soft soil leads, as a rule, to accidents and structure damage. Many authors and researchers give insights into the issues associated with construction on soft...
Generalized method of lines in tasks of the theory of elasticity in irregular shape area
This work is considering two options of using the generalized method of lines to solve problems of the theory of elasticity in flat area which has irregular shape. In the first option the area is limited by two straight...
Methodology of creation of territorial zoning maps based on characteristic values of climatic loads
The cartographic method of territorial zoning of climatic loads consists in division of territory into several regions with district values close to the biggest characteristic load value in the given territorial area. It...
Bearing capacity of damaged flexible reinforced concrete columns
The aim of the study is to develop a calculation model for determining the residual bearing capacity of compressed damaged reinforced concrete elements pre-modeled simulated damage and 1 without damage were manufactured...