EFFECT OF ECAP DIE ON STRUCTURE AND PROPERTIES OF AlMg ALLOY
Journal Title: Applied Engineering Letters - Year 2017, Vol 2, Issue 1
Abstract
The present study was initiated to investigate the influence of an ECAP die on the microstructure evolution and properties of commercial Al-Mg aluminum alloy in as-cast state. To characterize microstructural features an optical microscope was used. The properties of the as processed and initial state material were evaluated based on the hardness measurements. It was found that the applied ECAP die has the meaningful influence on the microstructure as well as the properties of the material.
Authors and Affiliations
Przemysław Snopiński, Tomasz Tański, Wiktor Matysiak
Keywords
Related Articles
- EP ID EP222913
- DOI -
- Views 99
- Downloads 0
TELOS FEASIBILITY ANALYSIS OF PHOTOVOLTAIC POWER PLANT
Energy independence as the goal of EU energy policy encourages energy efficiency measures and renewable energy sources (RES) implementation. Photovoltaic (PV) plants represent the usual technical solution when reconstruc...
TOPOLOGY DESIGN AND MODAL ANALYSIS OF A BRACKET VIA FEA
In this study, topology optimization of a jet engine bracket which was proposed from GE Aviation challenge for improving the brackets is presented using finite element analysis (FEA). The minimum mass, maximum equivalent...
FAILURE MODE AND STRENGTH ANALYSES OF RESISTANCE SPOT WELD JOINTS OF ALUMINIUM AND AUSTENITIC STAINLESS STEEL SHEET
Resistance spot welding (RSW) is considered as the dominant process for joining similar and dissimilar sheet metals in automotive industry. In this paper will be present the strength analyses of spot weld joint and analy...
HIGH AND ULTRA – HIGH CYCLE FATIGUE OF C55 HIGH GRADE CARBON STEEL
Article provides experimental results in the field of ultra-high cycle fatigue behaviour of C55 high grade carbon steel obtained at highfrequency loading (f ≈ 20 kHz, T = 20 ± 10 °C, R = -1). The results confirm a contin...
INFLUENCE OF THE TEETH NUMBER ON THE GEAR MODULE VALUE AND LOAD CAPACITY OF GEAR PAIR IN UNIVERSAL HELICAL GEAR DRIVES
The basic parameters of the universal gear drives, except the axis height, are not defined by the standard, so the manufacturers of universal gear reducers can define them in their way. Most of the manufacturers followed...