ENERGY AND EXERGY ANALYSIS OF A SOLAR PHOTOVOLTAIC PERFORMANCE IN BAGHDAD
Journal Title: Journal of Mechanical Engineering Research & Developments (JMERD) - Year 2019, Vol 42, Issue 2
Abstract
Photovoltaic modules usually generate electricity from a specific range of light frequencies and cannot cover the whole solar range of infrared, ultraviolet and diffused light. Hence, much of the striking sunlight energy is wasted by the solar modules. Thus, energy and exergy analysis were conducted to determine the performance of a solar photovoltaic module in Baghdad, Iraq. An engineering equation solver (EES) software has been using to develop the mathematical model. The environmental parameter of solar radiation, ambient temperature, and wind speed were obtained using Meteonorm software. The operating parameters of a PV module includes normal operation cell temperature, open-circuit voltage, and short-circuit current were obtain from manufacturer data sheet. The results showed that, the exergy efficiency ranged from 10.8% to 15.8 %, while the energy efficiency varies between 15.71% to 15.74 % and the exergy destruction varied from 182.8 to 352.3 W/m2 throughout the year. It has been found that, the first law efficiency was greater than second law efficiency. The differences between the two efficiencies from January to December are (25.6%, 31.1%, 25.1%, 25.6%, 17.8%, 9.6%, 9.6%, 1.2%, 0.5%, 0.45%, 2.5%, and 14.6%) respectively. While the exergy destruction through the same 12- months are (195.4, 233.5, 304.3, 352.3, 333.8, 292.9, 309.3, 274.6, 249.8, 215.9, 187.4, and 182.8) W/m2.
Authors and Affiliations
Fadhil Abdulrazzaq Kareem, Doaa Zaid Khalaf, Noor Samir Lafta, Yasser Abdul Lateef
ENERGY AND EXERGY ANALYSIS OF A SOLAR PHOTOVOLTAIC PERFORMANCE IN BAGHDAD
Photovoltaic modules usually generate electricity from a specific range of light frequencies and cannot cover the whole solar range of infrared, ultraviolet and diffused light. Hence, much of the striking sunlight energy...
RESEARCH ON THE APPLICATION OF DIESEL-RK IN THE CALCULATION AND EVALUATION OF TECHNICAL AND ECONOMIC CRITERIA OF MARINE DIESEL ENGINES USING THE UNIFIED ULSD AND BIODIESEL BLENDED FUEL
In the current trend of technology and computer science development, the application of computer software to solve technical problems in dynamics and combustion of engines becomes easier. However, commercial software pac...
TRACKING MAXIMUM POWER POINT FOR PHOTOVOLTAIC SYSTEM USING A NOVEL DIFFERENTIAL PARTICLE SWARM OPTIMIZATION
In this paper, a new differential particle swarm optimization (DPSO) method is investigated for tracking the maximum power point (MPP) for the photovoltaic (PV) system in order to enhance the operating efficiency of the...
A STUDY OF PHASE TRANSFORMATION IN SHAPE MEMORY ALLOY CuAl9Fe4
Microstructure and phase transformation in shape memory alloy Cu-Al (Fe addition: 9% Al, 4 % Fe) were investigated in this study. It is a material capable of restoring its original shape when impacted by a reasonable tem...
EFFECT OF DIFFERENT QUENCHING MEDIA ON MECHANICAL PROPERTIES OF AISI 1018 LOW CARBON STEEL
In this work, the mechanical properties of AISI 1018 low carbon steel after been treated by different quenching media (water, boiling water, boiling salt water, ice water, ice salt water) were evaluated. The microstructu...