ESTIMATION OF HEAT PROCESSES IN THE FRICTION CONTACT UNDER ROLLING WITH SLIPPAGE CONDITION
Journal Title: Проблеми тертя та зношування - Year 2017, Vol 77, Issue
Abstract
The influence of slip velocity at rolling with slippage on the intensity of heat release in the local contact at different modes of lubricating action was examined. Method of estimation of tem-perature resistance of the boundary film of the lubricating material were developed. Efficiency of using different procedures for calculating a temperature increase in the friction contact un-der conditions of dominating elastohydrodynamic and boundary modes of lubricating action was shown. Results of numerical calculation showing the possibilities of the corresponding methods were presented. The regularities of the heat release in the lubricating layer depending on value of slippage in rolling conditions are established.
Authors and Affiliations
О. А. МIKOSІANCHYK, A. P. KUDRIN, R. G. MNATSAKANOV, O. Ye YAKOBCHUK, V. V. TOKARUK
Keywords
Related Articles
- EP ID EP366379
- DOI -
- Views 68
- Downloads 0
FORCED COOLING OF THE FRICTION UNITS: «HEAT PUMP» EFFECT
A variety of types of brake devices used in the drives of hoisting and transport machines, road and construction machines, vehicles and in other branches of engineering. Friction pairs of brake devices significantly diff...
INVESTIGATION OF THE PHYSICAL AND MECHANICAL PROPERTIES OF GASKETS
The results of studies of the deformation properties, wear resistance, and the coefficient of fric- tion of NGF-HB, NGF-C, NF4, NGF-HB-F4, NGF-C-F4, AF-1, AP, HBP packing under fric- tion without lubrication within the l...
ABRASIVE INCREASE RESISTANCE STEEL 45 COMBINED COATINGS
The influence of the chemical composition of the electrode materials and modes of electric-alloying of steel 45 on its durability to abrasion wear is investigated. Established that maximum durability have coverage (Ti, C...
ENERGYLOADING OF VARIOUS TYPES OF DISCS IN BRAKE DEVICES OF LIFTING AND TRANSPORTING MACHINES (PART TWO)
The accident-free and safe operation of lifting and transporting machines largely depends on the reliable operation of the friction pairs of brake devices. The experience of operating has showed that the wear-friction ch...
FORMATION OF WEAR-RESISTANT GASOTERMIC COATINGS ON TITANIUM ALLOYS
The patterns of formation of detonating plasma coatings are investigated. Chemical and phase X-ray-structural analysis of powder and coatings after spraying are performed. The study results of the obtained coatings wear...