Evaluation of the Sonic System Efficiency for Raw Water Treatment
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2012, Vol 35, Issue 3
Abstract
Water pollution is defined as the change in the water composition that is harmful to human health, unsuitable for economic use or reactive and that can cause damage to the aquatic flora and fauna. In the appreciation of the World Health Organization, appreciation, approximately 2/3 of illnesses are due to polluted water, and the main pollutants come from industry. The paper presents an analysis of the technical systems used for raw water decanting with a view to making it drinkable.
Authors and Affiliations
Carmen CÎRNU, Marian BORDEI, Aurel CIUREA
Keywords
Related Articles
- EP ID EP618233
- DOI -
- Views 81
- Downloads 0
Correlation Between the Properties of Old Slags and the Recycling Solutions
The blast furnace and basic oxygen furnace route of steel making (from iron ores and coke to steel) or the so called integrated steel production generates simultaneously solid waste products. The slag is predominant, con...
Automated Apparatus-Program System for Evaluating the Strength of a Reducer Shaft
The paper deals with a design of automated system for studying the strength of a reducer shaft according to the probabilistic evaluation method concerning the examination of machine elements. The apparatus-program system...
Studies Concerning Energetic Consumption of Some Heating Equipments with Resistors
In order to increase the resistance of aluminium alloys a complex heat treatment is usually performed. Therefore, we must consider the reaction time between aluminium alloys and furnace atmosphera. These atmospheres cont...
Microstructural Characteristics of Sintered Powder Metallurgy Alloys
The purpose of this paper is to study the influence of processing parameters on the microstructural characteristics of sintered powder metallurgy alloys. The specimens were produced from atomised iron powders with differ...
XRD Analysis in Front of a Corrosion Crack Tip
During exploitation of the heat exchangers some damages can appear in the contact region between the gaskets and the stainless steel walls. The studies upon the material were performed using SEM microscopy, X-ray diffrac...