Experimental Setup in Study for HCCI Engine Vibration using I-kazTM Method and using Palm Oil Biodiesel Blended with RON 97 as Fuel
Journal Title: International Journal of Engineering Innovations and Research - Year 2018, Vol 7, Issue 1
Abstract
This paper presents work conducted at the Universiti Kebangsaan Malaysia to support of the HCCI Engine Program. The objective of this paper is to develop an engine that employs Homogeneous Charge Compression Ignition (HCCI) combustion and features using Palm Oil Methyl ester as fuel. A Novel of palm oil product using for HCCI engine fuel was investigated in vibration signal using RIONOTE hardware and Mathlab (I-kaz Vibro). Percentage of blend of Palm Oil Methyl Ester and RON 97 based on 0%, 5%, 10%, 20%, and 30% percentage blended. Result will be showed in comparison between blended fuel to power, torque, and fuel consumption (measured by dynamometer) with vibration signal produce during HCCI combustion. Conclusion of experiment analysing vibration signal will show the experimental plan is feasible and reasonable.
Authors and Affiliations
Azali Awaludin, et al.
Loss Minimization through the Allocation of DGs Considering the Stochastic Nature of Units
Smart gridasthe cleaner alternativeto the legacy power systemcan improve technical, economical, and environmental aspects of the systemup to a considerable degree. In smart grids, Distrib...
Synthesis of the Output Voltage for Multilevel Inverters
Trends toward large-scale integration and high-power application of green energy resources necessitate the advent of efficient power converter topologies, such as multilevel converters, with enhanced characteristics such...
Study of Mechanical Behaviour Natural Fibers Reinforced Composite Materials
In this work the investigation of experimental study of the evaluation of the different natural fiber as reinforcement with epoxy composites of mechanical properties. Composites were fabricated using Sisal/epoxy, Banana/...
Neural Networks Approach for Predicting Slope Failure Areas Based on the Onsite Slope Survey Parameters at a Specified Mountain Road
This study proposed a new method of using a neural network model for predicting slope failure areas by training different slope parameters obtained from 49 onsite slope failure surveys in a specified mountain road sectio...
The Simulation and Analysis on Correct Operation of Tire Blowout
For the driving condition of vehicls’ tire blowout at high speed, it is theoretically studied. Analyzing the kinematic response of the tire blowout vehicle, and exploring the correct operation mode after tire blowout, is...