INFLUENCE OF NICKEL ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ALUMINUM COPPER ALLOY
Journal Title: Journal of Mechanical Engineering Research & Developments (JMERD) - Year 2019, Vol 42, Issue 2
Abstract
This paper presents the results of Nickel component on the microstructure and mechanical properties of the aluminum-copper alloy. With the same heat treatment process (heated to 850oC quenching in water and tempering at 350oC in 2h) noticed: the sample was added nickel, it had phases of nickel with Al and Fe; these phases make sample’s mechanical properties better than the non-nickel sample. The samples were added Nickel, the hardness is higher than those without Nickel (105HRB and 92HRB). The abrasion results show that the Nickel alloyed samples also exhibited better than those without Nickel.
Authors and Affiliations
Vu Anh Tuan, Nguyen Duong Nam, Pham Ngoc Vuong, Mai Van Thi, Pham Mai Khanh
Keywords
Related Articles
- EP ID EP503672
- DOI 10.26480/jmerd.02.2019.84.86
- Views 78
- Downloads 0
PHYSICAL MODELS OF SOLID MASS AND RELATED PROCESSES IN INTERACTION WITH FOUNDATIONS
In the article, interaction of foundations with foundation beds is described and represented on the basis of a general theory of mathematical modeling of large systems in performing three mathematical spaces: – qualita...
EXPERIMENTAL DETERMINATION OF CHARACTERISTICS OF CRACK-RESISTANCE OF DISPERSE-STRENGTHENED COMPOSITES BASED ON NON-SATUTATED POLYESTERS
Based on the series of tests for three-point bending of rectangular bars with central cuts on a universal test machine, using the compliance and K-methods, experimental values of the fracture toughness characteristics of...
INCREASING THE LOGGING ROAD EFFICIENCY BY REDUCING THE INTENSITY OF RUTTING: MATHEMETICAL MODELING
Forest harvesting is an important industrial and social task. However, this process is associated with significant transportation difficulties. This leads to an increase in the number of failure cases. The purpose of thi...
CONTROL GAS NITRIDING PROCESS: A REVIEW
The detailed surface is the boundary between the machine part and the working environment or with other machine parts in the structure of the machine. The surface is directly affected by the mechanical, physical and chem...
HIGH PERFORMANCE WATER TREATMENT TECHNOLOGY FOR THE RESERVOIR PRESSURE MAINTENANCE AT OIL FIELDS
This article considers the problem of deterioration of permeability of reservoirs in the bottom-hole zone, as well as the problem of decrease of water intake capacity of water injection wells due to colmatation of pores...