PROPERTIES OF AN ANODIC OXIDE COATING MODIFIED BY THE APPLICATION OF A POLYMER FOR A FRICTION PAIR IN RECIPROCATING MOTION
Journal Title: Tribologia - Year 2012, Vol 243, Issue 3
Abstract
The paper represents the results of investigations conducted on a tribological test for technically dry conditions of the friction. Analysis of the stereological counter-specimen was subjected from AOC and AOC modified sealed up the polymers that is composites coats. Polymerisation occurred at a temperature below the recrystallization temperature of the alloy EN AW 5251. The values of the coefficient of the friction, the results of investigations AFM, and the parameters of the roughness were compared. The tribological properties of the composites are investigated using the pin-on-plate type wear tester T-17. This paper shows 3D models of the AOC modified polymer and the mechanism of wearing. Tribological measurements show the reduced wear and friction of the composite coatings as compared with the pure anodic oxide.
Authors and Affiliations
Grzegorz Służałek, Piotr Duda, Henryk Wistuba
Keywords
Related Articles
- EP ID EP270515
- DOI -
- Views 51
- Downloads 0
EFFECT OF THE SINTERING TEMPERATURE ON TRIBOLOGICAL WEAR OF 316L AND 316L-HAp OBTAINED WITH THE USE OF SPARK PLASMA SINTERING
The use of 316L stainless steel in osteoarticular system implants is associated with many operational problems. One of the methods that deal with these restrictions may be the development of new materials, including comp...
ANALYSIS OF THE POTENTIAL USAGE OF SELECTED MAGNETIC FLUIDS IN THRUST SLIDE BEARINGS
Magnetic fluids are substances whose rheological properties can be actively influenced by treatment with a magnetic field. Two main types of magnetic fluids can be distinguished: ferromagnetic fluids, and magnetorheologi...
Selection of polyurethane for the friction pair of a drilling machine due to tribological properties
Research on the tribological parameters for materials couples used for valves, valve guides and seat inserts
Research on the tribological properties of TiAl alloys used for valves mating with valve guides and seat inserts, made of cast iron, has been done. The aim of the research has been to obtain values of the coefficient of...
ANALIZA WPŁYWU WARTOŚCI LUZU ŁOŻYSKOWEGO ORAZ SZEROKOŚCI ROWKA SMARUJĄCEGO NA CHARAKTERYSTYKI FILMU OLEJOWEGO HYDRODYNAMICZNYCH ŁOŻYSK GŁÓWNYCH WAŁU KORBOWEGO
Przedstawiono analizę wpływu szerokości rowka olejowego oraz luzu łożyskowego na charakterystykę filmu olejowego w hydrodynamicznych łożyskach poprzecznych wału korbowego. Analizę przeprowadzono w celu określenia wpływu...