THE INFLUENCE OF CLEARANCES IN BALL BEARINGS ON WORK FAILURE OF THREE-BEARING SHAFTS
Journal Title: Tribologia - Year 2014, Vol 257, Issue 5
Abstract
Durability of deep groove ball bearings depends on factors (attributes) of design, technology, and operation. Among the design features, one of the most important is the bearings. Polish standards list five groups of looseness in bearings in the range from 0 to 105 microns. Manufacturers of roller bearings do not normally give the exact value of the bearing looseness. The aim of this study is to determine how looseness affects the play three-bearing shafts, including elasticity and resilience.
Authors and Affiliations
Jarosław KACZOR
Keywords
Related Articles
- EP ID EP261374
- DOI -
- Views 49
- Downloads 0
THE INFLUENCE OF THE LAYERED STRUCTURE OF POLYMER COATINGS ON THEIR EROSIVE RESISTANCE
The paper presents the results of erosive resistance investigation of three-layer epoxy coating systems with different compositions of surface layers. This layer was modified with glass microspheres or nanoparticles of a...
THE EFFECT OF THE IONIZING RADIATION ON THE TRIBOLOGICAL PROPERTIES OF THERMOPLASTIC POLYMERS RUBBING AGAINST STEEL
The paper describes the effects of gamma radiation doses on the tribological and mechanical properties of selected thermoplastic polymers: PEEK, PEI, PET, and PA6. Samples of those polymers were irradiated with gamma ray...
THE INFLUENCE OF AW/EP ADDITIVES ON LUBRICATING PROPERTIES OF ECOLOGICAL OIL COMPOSITES
The paper presents antiwear and extreme-pressure properties of lubricants containing ecological ashless AW/EP additives. The comparison with the commercial petrol additive was performed. The lubricants were prepared on o...
THE FATIGUE WEAR OF ACETABULAR PROSTHESES PE-UHMW ON ITS TRIBOLOGICAL PROPERTIES
The paper describes a fatigue wear examination of medical PE-UHMW. Samples of polyethylene were exposed to sliding friction in reciprocating movement against ANSI 316L stainless steel. The subjects of investigation conce...
RESEARCHING AND MODELING OF THE DYNAMIC VISCOSITY OF THE FERRO-OILS WITH THE DIFFERENT CONCENTRATIONS OF MAGNETIC PARTICLES IN THE ASPECT OF PRESSURE CHANGES
In this article, the results of the experimental research of determining the dynamic viscosity of the ferro-oils with different concentration of the magnetic particles in terms of pressure change are presented. The resea...