Universal multifunctional device for heat and mass exchange processes during organic raw material processing
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 6, Issue 1
Abstract
<p>The proposed innovative design solution of universal multifunctional device ensures implementation of the maximum number of heat exchange processes. They are: aging, drying, blanching, boiling, boiling soft, infusion, mixing, dissolution and partial extraction. Combination of main heat and mass exchange processes in a single device ensures its technological multioperationality and mobility, due to its location on a mobile platform. On the platform, there are: an engine section; a central support for fixing of the operation technological capacity; a section with a steam generator and a vacuum pump, technical lines. A block with automation tools controls the main operation parameters: speed of rotation of the shaft of the mixer; heating temperature; steam pressure and vacuum pressure is used block with automation. There is also an auxiliary technical retractable lifting rail with a rotating mechanism for unloading and loading of the capacity installed.</p><p>The structural solution of the multifunctional device ensures a use of replaceable section-modular elements. Heating of the technological capacity occurs due to a flexible radiating resistive electric heater of the radiating type, which ensures that the device reaches the operation mode in 1.5 minutes, an ease of maintenance and reduction of the metal capacity of the structure.</p>We established that the universal multifunctional device provides a reduction in duration of heat exchange processes during its approbation. Namely: aging of organic raw materials by 22 %, blanching ‒ by 25 %, extraction ‒ by 21 %, boiling ‒ by 32 %, drying ‒ by 13 %, infusion ‒ by 43 % and dissolution of the fine dispersed fraction ‒ by 20 %. The cost per unit expended on heating of a unit of product is less by 10 % and 19 % compared to UPTODS-150 and KVM-150 caldron, respectively. This confirms the effectiveness of the accepted innovative solution to ensure mobility, energy and resource efficiency, ease of operation and maintenance of the device
Authors and Affiliations
Aleksey Zagorulko, Andrii Zahorulko, Kateryna Kasabova, Vitalii Chervonyi, Oleksandr Omelchenko, Sergei Sabadash, Nadiia Zahorko, Oleg Peniov
Keywords
Related Articles
- EP ID EP528244
- DOI 10.15587/1729-4061.2018.148443
- Views 69
- Downloads 0
Determining the influence of parameters for gas-air flows on the thermal process of producing iron ore pellets
<p>We present the results of the study on changes in temperature of gas-air flows at the outlets from calcination zones and recuperation zones of a conveyor-calcination plant. We determined the influence of these tempera...
Improvement of reliability of fire engineering equipment based on a jet-niche technology
<p>The obtained results address the solution to problems on enhancing the reliability and operation efficiency of fuel consuming equipment at industrial and power engineering facilities in the course of low-cost moderniz...
The study of influence of natural antioxidants on quality of peanut and linseed oil blends during their storage
<p>Influence of various natural antioxidants (oil extracts of sage and black currant leaves, garlic and hips) on in-storage quality of oils has been studied. Dynamics of the acid and peroxide numbers of fat of the develo...
Development of the tensor model of multipath qоe-routing in an infocommunication network with providing the required quality rating
<p>This work has solved a relevant task to ensure the required level of quality of experience in an infocommunication network, which implied the development of a mathematical model of the multipath QoE-routing while main...
Process of resources provision management of the enterprise's activity with consideration of gender factor
<p>The study of the process of resources provision management of enterprise activity taking into account the gender factor was conducted. It was determined that the present environment requires business entities to take...