Wear Characterization of Aluminium/Basalt Fiber Reinforced Metal Matrix Composites - A Novel Material
Journal Title: Tribology in Industry - Year 2017, Vol 39, Issue 2
Abstract
Aluminum alloy based metal matrix composite participate have a wider applications in wear resistance applications. Attempt made in current study is that, basalt fiber reinforced aluminum metal matrix composite have been prepared using stir casting method. Different weight percentage of basalt fiber reinforced with Al (6061) metal matrix composites are used to study the wear resistance of the composites. For wear study, percentage of reinforcement, normal load and sliding velocity are the considered as important parameters. To study the effect of basalt fiber reinforcement on the dry sliding wear of Al6061 alloy composites the Pin On wear tester is used. Initially hardness of the composites was tested, it was found that increasing reinforcement in the composite hardness value of the composites also increased. Based on the Grey relation analysis (GRA) the effects of wear resistance of the composites were studied.
Authors and Affiliations
P. Amuthakkannan, V. Manikandan, M. Ayyanar Raja, S. Rajesh
Keywords
Related Articles
- EP ID EP228735
- DOI 10.24874/ti.2017.39.02.09
- Views 107
- Downloads 0
Development of a Constitutive Friction Law based on the Frictional Interaction of Rough Surfaces
Friction has a considerable impact in metal forming. This is in particular true for sheet-bulk metal-forming (SBMF) in which local highly varying contact loads occur. A constitutive friction law suited to the needs of SB...
Correlation between Surface Roughness Characteristics in CO2 Laser Cutting of Mild Steel
CO2 laser oxygen cutting of mild steel is widely used industrial application. Cut surface quality is a very important characteristic of laser cutting that ensures an advantage over other contour cutting processes. In th...
Influence of Load and Sliding Speed on Friction Coefficient of IBAD Deposited TiN
The influence of applied load and sliding speed on the tribological performance, i.e. friction and wear of TiN IBAD coating in sliding with corundum ball has been evaluated using reciprocating sliding wear test. Post cha...
Heat Generation During Friction Stir Welding Process
Friction stir welding – FSW was a promising welding technology from the same moment of its existence because of its easy use, low energy costs, being ecology friendly process and with no need for filler metal. FSW works...
Development of Entada Mannii Fiber Polypropylene Matrix Composites for Light Weight Applications
This study investigates the use of Entada mannii fiber as potential reinforcement of thermoplastic composites suitable for light weight applications. Composites of 5 wt.%, 10 wt.% and 15 wt.% were produced by compression...