EVALUATION OF THE PROPERTIES OF DIAMOND-LIKE CARBON COATINGS LUBRICATED WITH IONIC LIQUIDS
Journal Title: Tribologia - Year 2017, Vol 275, Issue 5
Abstract
The purpose of the study was to evaluate the properties of DLC coatings with ionic liquids used as lubricants. The type a-C: H DLC coatings were deposited onto the 100Cr6 steel substrate by PVD. The surface topography of the DLC coatings was studied with a Bruker's Dimension Icon® Atomic Force Microscope (AFM), and surface morphology testing, cross section and chemical composition analyses were performed using the Jeol JSM-7100F scanning electron microscope, equipped with an EDS microanalyzer. Surface geometry measurements prior to and after tribological tests were performed on a Taylor Hobson's Talysurf CCI contactless optical profilometer. The tribological tests were carried out on an Anton Paar TRB tribotester under technically dry and lubricated friction with an ionic liquid, 1-Butyl-3-methylimidazolium tetrafluoroborate. The results show that DLC coatings and ionic liquids can significantly reduce resistance to motion.
Authors and Affiliations
Krystian MILEWSKI, Monika MADEJ, Magdalena NIEMCZEWSKA-WÓJCIK, Dariusz OZIMINA
Keywords
Related Articles
- EP ID EP236683
- DOI 10.5604/01.3001.0010.5901
- Views 72
- Downloads 0
THE TRIBOLOGICAL PROPERTIES OF COATINGS LUBRICATED WITH A BIODEGRADABLE CUTTING FLUID
This paper presents the tribological results of on investigations of TiAlN coatings that were deposited on HS6-5-2C steel using the physical vapour deposition PVD technique. An observation of the coating structure was ca...
PHYSICO-CHEMICAL AND TRIBOLOGICAL PROPERTIES OF DITHIOPHOSPHORIC O,O-DIESTERS
The paper contains information about the synthesis of physicochemical and tribological properties of dithiophosphoric acid derivatives. Their thermal, hydrolytic and oxidative decomposition and adsorption on solid surfac...
WPŁYW STRUKTURY CHEMICZNEJ SYNTETYCZNYCH WĘGLOWODORÓW I ALKOHOLI NA SMARNOŚĆ PALIW DO SILNIKÓW ZS I SILNIKÓW LOTNICZYCH
Przedmiotem artykułu jest mechanizm tworzenia warstwy smarującej przez paliwa zawierające syntetyczne węglowodory i alkohole. Rozwój paliw alternatywnych spowodował wzrost zainteresowania mechanizmem smarowania elementów...
TRIBOLOGICAL TESTING OF BEVEL GEARS. PART I – TEST RIG AND TEST METHODS
The paper presents a test rig and methods developed at the Institute for Sustainable Technologies in Radom for the tribological testing of spiral bevel gears. The idea resulted from a problem announced by some manufactur...
Wpływ preparatów krwi na właściwości tribologiczne skojarzenia UHMWPE/STOP CoCrMo
Wprowadzenie nowego materiału na implanty długookresowe, a zwłaszcza endoprotezy, powinno być poprzedzone kompleksowymi badaniami – w tym tribologicznymi. Niemożliwe do pominięcia badania eksploatacyjne in vitro materiał...