Obtaining of Frequency and Voltage Dependent Resistance and Interfacial States Distribution Profiles on Au / (PrBaCoO nanofiber) / n-Si Structures With Different Methods
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2017, Vol 5, Issue 3
Abstract
In this study, the density of interface states (NSS) and series resistance (RS) were examined for both frequency and voltage in PrBaCoO-nanofiber interface layered metal-semiconductor (Au/n-Si) structures. For this purpose, capacitance-voltage (C-V) and conductivity-voltage (G/-V) measurements were performed at room temperature, 1 kHz-1 MHz frequency and (3 V) voltage range. Frequency and voltage-dependent distributions of interface states were obtained from Hill Coleman and high-low capacitance (CHF-CLF) methods, and RS from Nicollian-Brews method. Interfacial states and their lifetime () were obtained from the Admittance/Conductance method developed by Nicollien and Goetzberger. Experimental results show that NSS states in impedance measurements are particularly effective in the regions of depletion and inversion while RS is only effective in the accumulation region and at high frequencies. The measured capacitance and conductivity values are corrected for high frequencies to minimize the RS effect on the measured C-V and G/-V pilots.
Authors and Affiliations
Selçuk DEMİREZEN
Keywords
Related Articles
- EP ID EP484343
- DOI -
- Views 75
- Downloads 0
The Experimental and Theoretical Investigation of Effects on the Cooling Performance of Nozzle Structure in Adiabatic Cooling Systems
Global warming, rise in life standards, and so on increase the demand for cooling and air-conditioning systems every passing day. Various methods are used to enhance the performance of these systems. One of these methods...
The Effects of Shot Peening parameters on the subsurface properties of AA7075 T6 aluminum alloy
Shot peening (SP) is an important mechanical surface treatment widely used to improve the fatigue life of mechanical components operating under dynamic loads which have been specifically used in automotive and aerospace...
Modelling of Wind Farms and Analysis of Effects of Wind Farms on Transmission System
In recent years, the energy demand in Turkey and the world is increasing day by day in parallel with the population growth and the developments experienced in technology. Renewable energy resources are rapidly spreading...
Performance Of Cross Sectional Geometries Of Beams According To Buckling Strength Which Are 3d Printed With The Same Amount Of Filament
Aim of this study is to determine the cross sectional geometries of beams which have better response to buckling with the usage of same amount of filament. These beams have the same cross sectional area and length. Thus,...
Prediction of Flow Value of Bituminous hot Mixtures by Regression Models
In this study, flow value of the bituminous hot mixtures that can be determined by Marshall Test has been aimed to be predicted by regression models based on material and mixture properties. In this context, data on bitu...