Optimum marks of porous concrete for walls of civil buildings
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2017, Vol 1, Issue 68
Abstract
A wide range of possible values of average density, strength indicators and thermal conductivity determines the efficiency of the use of porous concrete as a material for the walls of residential and public buildings. An increase average density leads to an increase in the coefficient of thermal conductivity and wall thickness under the conditions of thermal protection. At the same time, strength increases and the thickness of the wall decreases from the conditions of bearing capacity. According to the previously developed methodology, which is based on the leveling of wall thickness required by the conditions of thermal protection and bearing capacity, worked out recommendations for choosing the optimal mark for the average density of porous concrete for single-layer bearing walls of civil buildings. External bearing walls of low-rise residential and public buildings with different structural solutions in different climatic conditions of exploitation under the influence of a wide range of loads on overlapping and using different grades of porous concrete were investigated. The main indicator for choosing the optimal concrete type is the total running meter load on the pier between windows, which, depending on the purpose and design of the building, can vary from 5 kN/m to 400 kN/m. According to the results of calculations, the dependence of the optimal brand of porous concrete from the magnitude of the running meter load on the walls for the two temperature zones of Ukraine was determined. Calculations indicate the possibility of using porous concrete for erection of external walls of buildings up to five floors. Developed recommendations allow us to choose a brand of porous concrete according to the table depending on the temperature zone of Ukraine and the running meter on the walls, as well as to determine the desired thickness of the concrete wall of the optimum mark.
Authors and Affiliations
V. A. , Pashinsky, S. O. , Karpushin
Keywords
Related Articles
- EP ID EP325946
- DOI -
- Views 140
- Downloads 0
Methodology of creation of territorial zoning maps based on characteristic values of climatic loads
The cartographic method of territorial zoning of climatic loads consists in division of territory into several regions with district values close to the biggest characteristic load value in the given territorial area. It...
A mixed variational functional in creep-damage problems of axisymmetric bodies
The mathematical statement of creep-damage problems for axisymmetric bodies is presented. The mathematical statement includes the variation principle for the mixed functional, which is formulated on independently varied...
Determination of climatic loads by meteorological data during verification calculations of load-bearing structures
The characteristic values of climatic loads in the design point are determined with considering of the data of the nearest meteorological stations. The possibility of combining of the annual maxima samples, statistical c...
Features of legislative regulation of the construction industry in Ukraine
The purpose of research is to determine the priority ways to improve the legal support for the construction industry in Ukraine. The article analyzes modern regulatory and legal regulation of the construction industry. A...
The temperature modes’ dynamics in the system “primary clarifier - aerotank - secondary clarifier” of Rivne wwtp
Wastewater treatment plants in Ukraine need modernization. Modernization should include the oxidation of organic substances and removal of nitrogen compounds. The temperature regime research was carried out at Rivne muni...