THE ROLE OF OBJECTIVE FUNCTION IN ENGINEERING DESING
Journal Title: Materials Engineering - Materialove inzinierstvo (MEMI) - Year 2010, Vol 17, Issue 4
Abstract
The process of material choice is a key element in the production of machines, devices and other engineering constructions. Engineering design relates to the design of engineered artifacts formed by materials of various types. Materials play an important role during the entire design process. At the early design stage, materials may achieve some of the required functions. Therefore, designers may need to identify materials with specific functionalities in order to find feasible design concepts including the costs of material and technology. In this paper, an overview of research in materials identification and materials selection is introduced. The objective function was used in the material selection. The assumed demands in industrial practice were verified by means of criteria patterns.
Authors and Affiliations
Robert Ulewicz, Frantisek Novy, Magdalena Mazur
Keywords
Related Articles
- EP ID EP129634
- DOI -
- Views 85
- Downloads 0
IMPACT STRENGTH AND FAILURE ANALYSIS OF WELDED DAMASCUS STEEL
The aim of this work was the experimental research of damascus steel from point of view of the structural analyze, impact strength and failure analyzes. The damascus steel was produced by method of forged welding from ST...
THE STUDY OF MOLTEN ZINC INTERACTION ON THE SURFACE OF REFRACTORIES IN THE PRODUCTION OF ZINC OXIDE
This paper is closely connected with the complete process of indirect production of ZnO as well as with the problems which occur during the metallurgical process. Purity of raw materials has an important influence on the...
SOLUTION TREATMENT EFFECT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AUTOMOTIVE CAST ALLOY
The contribution describes influence of the heat treatment (solution treatment at temperature 545°C and 565°C with different holding time 2, 4, 8, 16 and 32 hours; than water quenching at 40°C and natural aging at room t...
CHOSEN PROPERTIES OF SANDWICH MATERIAL Ti-304 STAINLESS STEEL AFTER EXPLOSIVE WELDING
The work deals with evaluation of joint of stainless steel 304 SS (sheet) and commercially pure Ti both after welding explosion and followed-up annealing at 600°C/1.5h/air. The bonding line shows sinusoidal character wit...
THE EFFECT OF THE ANNEALING TEMPERATURE ON THE CORROSION RESISTANCE OF WELD JOINT OF AISI 310 STEEL - SHORT COMMUNICATION
The article presents samples of weld joint of AISI 310 austenitic steel which were subjected to solution annealing at various temperature - time exposures. The objective of the experiment was to determine the annealin...